Eleaf EC & ECL Replacement Coil Pack

$20.90

Brand Joyetech

Pack of five replacement coils.

Compatible With

iJust 2
iJust S
Pico
Melo II
Melo III

 

More Details →

CUSTOMER REVIEWS

Based on 3 reviews Write a review
Sold Out

eLeaf iCare

$16.80

Brand Eleaf

This product is unavailable

The Eleaf iCare all in one vape kit is a real game changer at an exceptionally low price point, one of the lowest cost complete vape devices in New Zealand.

It's a tiny and compact e-cigarette starter kit with an internal tank and one of the few to have an adjustable airflow system. Intuitive and simple to use, with an automatic On/Off feature that initiates when vaping and the tank can be refilled from the top with ease. By using a higher strength e-liquid, the iCare perfectly recreates the sensation you are accustomed to and with intuitive three colour LEDs, you can easily check the battery status by a simple glance at the colour of the light. A great pocket friendly device for experienced vapers and anyone looking to quit smoking in NZ alike.

Additional replacement coils

Link: Eleaf iCare IC Replacement Coil Pack

  • All In One system
  • Draw activated firing
  • Integrated 650mAh rechargeable battery
  • Micro USB charged
  • 1.8ml tank capacity
  • Top filled
  • iCare IC 1.1 ohm coil
  • 5w to 15w output
  • Adjustable airflow
  • Incredibly compact profile at 30mm x 14mm x 75mm
  • Multi use top cap that acts as drip tip
  • Integrated coil slot tool
  • Three color LED feedback
    • Green - 100 to 16% battery state
    • Yellow - 15 to 6% battery state
    • Red - less Than 5% battery state

In the box
1x Eleaf iCare
2x 1.1ohm IC coils
1x Micro USB charging cable
1x User manual

More Details →

CUSTOMER REVIEWS

Based on 8 reviews Write a review

Eleaf iCare IC Replacement Coil Pack

$9.50

Brand Eleaf

The iCare IC Replacement Coil Pack contains five coils.

The IC Replacement Coil Family makes its debut with the iCare, with a small yet highly effective size with a resistance rating of 1.1 ohms and a wattage range between 5w and 15w. It features a top threaded design built for ultra compact form factor devices and systems.
  • IC Coil Structure
  • 1.1Ω
  • 5w to 15W
    More Details →

    CUSTOMER REVIEWS

    No reviews yet Write a review

    Eleaf iJust S Kit // 3000mAh

    $68.00

    Brand Joyetech

    An expansion to our starter kit range for our NZ online and brick and mortar shops, with a higher battery capacity than Joyetech eGo AIO, the Eleaf iJust S fits in to the mid-range device category perfectly.

    The next generation of the iJust platform, designed to be a full size, all day version that packs a massive 3000mAh integrated battery coupled with the top-filled 4ml capacity iJust S Sub-Ohm Tank.

    The iJust S utilises a direct output voltage system in which output is determined by the current state and level of the 3000mAh battery, and features a large range of compatibility with atomisers between 0.15 to 3.5ohms. The chassis retains the high end, heavy duty fit and feel while now measuring 24.5mm in order to support the increased battery capacity and is fitted with a side mounted Micro USB Port that supports up to a 1A input charge.

    The iJust S is operated by the enlarged and raised single button which is surrounded by a LED light that offers feedback to the state of the system. A spring-loaded gold plated connection ensures consistent contact as well as allowing for compatibility with additional atomizers.

    Included with the kit is the iJust S Sub-Ohm Tank, designed to match the 24.5mm diameter of the iJust S, while implementing a threaded top fill system. The tank reservoir measures 4ml in total, and utilises the EC coil family, with the new 0.18 ohm SS316L coil making its first appearance with this set.

    Also included are the extremely well balanced 0.3ohm (pre-installed), 0.5 ohm EC heads, matching perfectly with the output curve of the iJust S battery. Airflow has seen a redesign from previous iJust tanks, with dual airslots measuring 12mm by 3mm each replacing the older quad airflow system. Built for modern day demands, the iJust S Kit offers outstanding battery life with a versatile Sub-Ohm Tank in an easy to use and affordable package.

    Purchase replacement coils here - Eleaf EC & ECL Replacement Coills

    iJust S Battery

    • 3000mAh battery
    • Single button operation
    • LED feedback button
    • Battery life indicator
    • 24.5mm diameter
    • Direct output voltage
    • 0.15 to 3.5ohm atomiser resistance range
    • Micro-USB charging port
    • 1A max charging rate
    • Spring-loaded gold plated connection
    • Atomiser short circuit, no atomiser & low voltage protection

    iJust S Sub-Ohm Tank

    • 24.5mm diameter
    • Threaded top fill
    • Dual fill ports
    • 4 Milliliter tank capacity
    • Dual slotted airflow 12mm by 3mm
    • Throttled via included silicone ring
    • EC coil family
    • Vertical Coil Arrangement
    • Fully Detachable Structure
    • Convenient Cleaning

    In the box
    1x Eleaf iJust S Kit
    1x 0.3ohm EC Coil (pre-installed)
    1x ECL 0.18 ohm coil
    1x 0.5 ohm EC coil
    1x Spare silicone ring
    1x Micro USB charging cable
    User Manual

    More Details →

    CUSTOMER REVIEWS

    Based on 1 review Write a review

    Eleaf iStick Pico

    $53.95

    Brand Eleaf

    The iStick Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell, the iStick Pico provides up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.

    Requires 1x 18650 battery. We recommend the: Samsung 25R5, Sony VTC5

    • Extremely compact and light weight
    • Powered by a single high drain 18650 battery (not included)
    • Micro USB charging (included)
    • Firmware upgradeable
    • Three customisable TCR settings for advanced users
    Specifications
    Size: 45mm x 23mm x 70.5mm
    Cell type: high discharge 18650 cell
    Cell type: Maximum continuous discharge current should be above 25A
    Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
    Output wattage: 1-75W
    Resistance range: 0.05-1.5ohm (TC modes)
    Resistance range: 0.1-3.5ohm (VW/Bypass mode)
    Temperature range: 100-315℃/200-600℉ (TC modes)
     
    In the box

    1x Eleaf iStick Pico Mod 
    1x USB cable
    Instruction manual  

    Operation Guide

    Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

    Vaping: Long press the fire button and take a puff.

    Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

    Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

    Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

    Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

    More Details →

    CUSTOMER REVIEWS

    Based on 7 reviews Write a review

    Eleaf iStick Pico Resin

    $56.90

    Brand Eleaf

    The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.

    The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.

    Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!

    Requires 1x 18650 battery. We recommend the: Samsung 25R, Samsung 30QSony VTC5

    • Extremely compact and light weight
    • OLED screen
    • On board charging (Micro USB)
    • Firmware upgradeable
    • Three customisable TCR settings for advanced users

    Pico Specifications
    Size: 45mm x 23mm x 70.5mm
    Cell type: high discharge 18650 cell
    Cell type: Maximum continuous discharge current should be above 25A
    Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
    Output wattage: 1-75W
    Resistance range: 0.05-1.5ohm (TC modes)
    Resistance range: 0.1-3.5ohm (VW/Bypass mode)
    Temperature range: 100-315℃/200-600℉ (TC modes) 

    In the box

    1x Eleaf iStick Pico Resin Mod
    1x Micro USB charging cable
    User manual

    Operation Guide

    Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

    Vaping: Long press the fire button and take a puff.

    Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

    Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

    Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

    Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

    More Details →

    CUSTOMER REVIEWS

    Based on 2 reviews Write a review

    Eleaf iStick Pico Resin w/ MELO 3 Mini Kit

    $98.00

    Brand Eleaf

    The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.

    The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.

    Included in the full kit is a Melo 3 Mini tank to perfectly match with the Pico. The 2ml tank can be easily filled via the top cap and adjustable airflow is controlled at the bottom of the unit.

    Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!

    Requires 1x 18650 battery. We recommend the: Samsung 25R, Samsung 30QSony VTC5

    • Extremely compact and light weight
    • OLED screen
    • On board charging (Micro USB)
    • Firmware upgradeable
    • Three customisable TCR settings for advanced users

    Pico Specifications
    Size: 45mm x 23mm x 70.5mm
    Cell type: high discharge 18650 cell
    Cell type: Maximum continuous discharge current should be above 25A
    Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
    Output wattage: 1-75W
    Resistance range: 0.05-1.5ohm (TC modes)
    Resistance range: 0.1-3.5ohm (VW/Bypass mode)
    Temperature range: 100-315℃/200-600℉ (TC modes)

    Melo 3 Mini Specifications
    2ml tank capacity
    Adjustable airflow
    Convenient top fill
    Stainless steel & glass tank construction
    Delrin lined drip tip
     
    In the box

    1x Eleaf iStick Pico Resin Mod
    1x Eleaf Melo 3 Mini Tank
    1x Eleaf EC 0.3Ω coil (preinstalled)
    1x Eleaf EC 0.5Ω coil
    2x Spare tank o-rings
    1x Micro USB charging cable
    User manual

    Operation Guide

    Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

    Vaping: Long press the fire button and take a puff.

    Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

    Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

    Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

    Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

    More Details →

    CUSTOMER REVIEWS

    Based on 1 review Write a review
    Sold Out

    iCare Replacement Coil Pack (Large Wicking Holes)

    $15.30

    Brand Eleaf

    This product is unavailable

    Pack of five coils designed for high VG e-liquid. Small yet efficient, these new LWH atomiser heads will deliver a satisfying amount of vapor with superior flavor with both direct or mouth to lung vaping.

    Compatible With
    Eleaf iCare Kit
    Eleaf iCare Mini PCC Kit

      More Details →

      CUSTOMER REVIEWS

      Based on 1 review Write a review