iJoy Zenith 3 Mod / 300W // Includes 2x 20700 Batteries

$98.00

Or 4x interest free payments of $24.50 NZD

Brand iJoy

The Zenith 3 is the latest dual 20700 battery semi-mechanical box mod to land in NZ. Presenting with a unique easy to grip shape with hard lines and gorgeous colour accents, it features a voltage adjustable knob with 16 voltage levels from 2.4V-6.9V.

The Zenith 3 box mod’s chipset is designed by IWEPAL and features short circuit protection, low power protection, reverse battery protection and has milliseconds fire speed with a maximum output of 300W and 50A discharge.

The device is simple to operate, no overhang with large atomisers, supports USB charging, and is compatible with 20700 batteries for longer life. An 18650 battery adapter is included. 

  • Max Wattage: 300W
  • Size: 92*49*34.5mm 
  • Dual 20700 batteries mod with long battery life
  • Semi-mechanical High power Box Mod
  • 360 degree Adjustable Voltage Knob
  • 16 voltage levels to adjust from 2.4-6.9V
  • Screenless Design - Efficient Battery Use
  • Various protection
  • Large side fire button
  • Resistance Range: 0.05~3.0 ohm
  • USB port charging support
In The Box
1x IJOY Zenith 3 Box Mod
2x 20700 3000mAh High Drain Batteries
1x 18650 Adapter
1x USB Cable
1x Manual
1x Warranty Card
More Details →

CUSTOMER REVIEWS

Based on 1 review Write a review

dotMod dotBox Dual Mech

$204.00

Or 4x interest free payments of $51.00 NZD

Brand dotMod

The newly released dotMod dotBox Dual Mech is now available in NZ, first with The Vape Shop!

Feel the power in your hands with the latest from dotMod. Enter the Dual Mech.

Harness the raw power in Series Mode. Or maximise your battery life in Parallel Mode. Have it your way!

Brand New Ergonomic Design

Perfect for the Lefties and the Righties, with the new button placement you'll be able to comfortably hold your mod however you want.

Maximum Power

Experience power like no other! While on Series Mode, cloud chasers will be able to push their cloud output to the max with by doubling the voltage for twice the power.

Last Longer

When switched to Parallel Mode you'll love the ability to vape for much longer and still experience the power of two 18650 batteries.

  • Mode Selection switch [Parallel, Off, Series] utilising two 18650 batteries
  • Magnetic front and rear panels for customisation
  • Replaceable power button
  • Short circuit protection features
  • Anodised aluminum construction of the chassis and both doors

IMPORTANT NOTICE: This product is for advanced users only. This is a mechanical (not regulated) mod, intended for use by experienced vapers, and requires regular maintenance. Click here for instructions on properly maintaining your dotBox Dual Mech.

Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1Ω to 3.0Ω. Do not build below 0.1Ω resistance. Use at your own risk and take appropriate precautions when using this device. This product is for advanced users only.

        In The Box
        1x dotBox Dual Mech 
        2x Removable Doors
        1x User Manual
        1x Warning Tab
        1x Certificate Of Authenticity 

        More Details →

        THC Tauren Mech Mod

        $89.00

        Or 4x interest free payments of $22.25 NZD

        Brand Thunderhead Creations

        The Tauren Mech Mod is a luxury mechanical mod by Thunderhead Creations. It features an innovative ball connected button for full 360° contact and no firing hesitation. Compatible with 21700, 20700 and 18650 batteries with the adaptor, this mod packs a punch. It is made of pure brass or copper with a gorgeous black cerakote finish. It comes in at 91mm tall by 26mm at its widest, and 24mm across the top.

        In The Box
        THC Tauren Mech Mod
        THC Chain
        Flanelette Bag
        18650 Adapter
        Warranty Card

          Mechanical Mod Safety

          A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

          More Details →

          CUSTOMER REVIEWS

          Based on 1 review Write a review
          Sold Out

          VGOD Pro Mech 2 Kit

          $149.00

          Or 4x interest free payments of $37.25 NZD

          Brand VGOD

          This product is unavailable

          The worlds most popular mech tube is now available in New Zealand!

          Bend tricks and chuck clouds with the VGOD Mech Pro 2 Kit. This kit is made for serious vapers! Featuring a copper chassis, CNC machined delrin comfort grips, and VGOD's own TriCon switch - the Mech Pro 2 offers the best in comfort, quality, and performance. 

          This kit includes both the VGOD Mech Pro 2 tube and the VGOD Elite RDA.

          Product Specifications:

          VGOD Mech Tube:

          • Unique CNC machined removable Delrin comfort sleeves.
          • TriCon switch comes with three independent pins increase surface contact with battery.
          • Carbon fibre switch with built-in self-adjusting battery ring to lock battery in place.
          • Comes with Elite RDA, 2ml juice well, dual post build deck.
          • Portable case included for convenient carrying and storage.
          • Dimension: 24 x 85.2mm
          • Material: Billet Copper/Stainless Steel/Gold.
          • Cell Type: Single high-rate 18650 cell (Not Included).
          • Thread: 510 hybrid thread.

          Elite RDA:

          • Height: 33mm
          • Outside Diameter: 24mm
          • Thread: 510 thread
          • Juice Well: 9.25mm in depth
          • Liquid Capacity: 2ml

          Kit Includes:

          • 1 x VGOD PRO Mech 2 MOD
          • 1 x VGOD Elite RDA
          • 1 x VGOD Carry Case
          • 1 x Manual
          • 1 x Accessories Pack
          More Details →

          CUSTOMER REVIEWS

          Based on 1 review Write a review

          VandyVape Pulse BF Squonk Kit // 8ml

          $108.00

          Or 4x interest free payments of $27.00 NZD

          Brand Vandy Vape

          The Pulse Bottom Feed Squonk Box Kit by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

          • Locking power switch to help avoid accidental firing when not in use
          • Spring loaded 510 pin to accept many different length 510 pins of various designs
          • 8mL food grade soft squeeze silicone bottle
          • Copper contacts
          • Replaceable front and back panels
          • Manual Battery Disconnect
          • Requires a high amp 18650 or 20700 battery purchase here: Batteries
          • 8.0m food grade silicone bottle for squonking

          Retaining similar aesthetics from the original with a simple yet elegant appeal, the latest RDA in NZ from Vandy Vape, the Pulse 24 measures 24.4mm in diameter, innovative airflow style returns with side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes and acting as a leak resistant feature due to the angled orientation.

          The Pulse 24 BF integrates a quad terminal postless design, large terminal openings set into the deck and tightened via side-secured Phillips screws. The deck and chamber accommodates a wide range of large coil structures and a large liquid well. The well is cleverly designed for an efficient squonk-ready set-up with the included bottom-feeding 510 pin that feeds directly into the two sides of the juice well.

          In The Box
          1x Pulse BF Squonk Box Mod
          1x Pulse 24 BF RDA
          1x 16mm Drip Tip
          1 x 8ml Squonk Bottle
          1x 18650 Battery Adaptor
          2x Accessory Bags
          1x User Manual

            More Details →

            CUSTOMER REVIEWS

            Based on 1 review Write a review

            Vandy Vape Pulse BF Squonk Mod // 8ml

            $64.00

            Or 4x interest free payments of $16.00 NZD

            Brand Vandy Vape

            The Pulse Bottom Feed Squonk Box Mod by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

            • Locking power switch to help avoid accidental firing when not in use
            • Spring loaded 510 pin to accept many different length 510 pins of various designs
            • 8mL food grade soft squeeze silicone bottle
            • Copper contacts
            • Replaceable front and back panels
            • Manual Battery Disconnect
            • Requires a high amp 18650 or 20700 battery purchase here: Batteries
            • 8.0m food grade silicone bottle for squonking
            In The Box
            1x Pulse BF Squonk Box Mod
            1x 18650 Battery Adaptor
            1x User Manual
              More Details →

              dotMod dotSquonk

              $148.00

              Or 4x interest free payments of $37.00 NZD

              Brand dotMod

              dotSquonk, the squonk you've been looking for, now available in NZ and delivered to your door overnight!

              The dotSquonk that you can afford. With so many squonk boxes on the market, DotMod wanted to do the sqounk right. And part of being right is being in a price range that everyday advanced users can afford. Coming in at just under $150 before shipping, you can be bottom-feeding by Christmas in style!

              Two ways to play. Refill your bottle by removing it or if you're in a hurry you can top fill using your unicorn style bottle, through your dotRDA24 squonk pin. You decide.

              The perfect marriage. the dotSquonk brings out added features when utilized with the dotRDA24.  And with an upgraded center 510 pin (which is also removable) made of 24k gold plated brass, this is a mechanical mod with even better pull than our tube mods.   

              Why it's awesome

              1. Might just be best squonk in town.
              2. Customise your dotSquonk's look with 2 doors. 
              3. Pairs perfectly with the dotRDA24.
              4. Use 20700 or 18650 batteries.
              5. Top-fill through the dotRDA24 for on the go. 
              6. Beveled edges for superior feel in your hand.

              In The Box

              1x dotSquonk 
              2x Removable doors
              1x 18650 Battery sleeve 
              1x Juice Bottle (silicon with ultem top)
              1x 510 connector o-ring
              1x Brass 24k gold plated 510 squonk pin 
              1x Certificate of authenticity 

                Please note:

                This product is for advanced users only.

                Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1Ω to 3.0Ω. Do not build below 0.1Ω resistance. Use at your own risk and take appropriate precautions when using this device.

                More Details →

                CUSTOMER REVIEWS

                No reviews yet Write a review

                dotMod Tiffany Blue Petri Lite - Limited Edition

                $188.00

                Or 4x interest free payments of $47.00 NZD

                Brand dotMod

                • Hard Hitting Naval Brass
                • Anodised Aluminum Composite Button Design
                • Precision Anodised Aluminum Tube And Body  
                • 24K Gold Plated Threading And Accents
                • 24K Gold Plated Copper Contacts
                • Hybrid Connection
                • Fully Masked Internals (no cleaning, ever) 
                • Precision Micro-Engravings
                • Serialised

                In The Box

                1x dotMod Tiffany Blue Petri Lite
                1x dotMod Limited Edition 24K Gold Plated Brass Drip Tip
                1x Original Petri Spring (light throw)
                1x Super Heavy Silver Plated Beryllium Copper Spring
                1x Certificate Of Authenticity
                1x Mini Allen Key For Button Assembly

                More Details →
                Sold Out

                CoilART MAGE Mech Tricker Kit

                $119.00

                Or 4x interest free payments of $29.75 NZD

                Brand CoilART

                This product is unavailable

                The pairing of the Mage mechanical mod and Mage RDA from CoilArt, the CoilArt Mage Mech Tricker kit combines high end performance and aesthetic beauty into one incredible little package. Constructed from billeted brass and covered in an eye catching multi-colour resin or subtle black frost finish, the Mage is a sight to behold.

                Resin

                • 24mm diameter
                • 125mm overall height
                • Magnetic fire button
                • Billet brass construction
                • Multicolour resin coating
                • Internal insulation protection
                • Self-adjusting battery contact
                • Hybrid 510 connection
                • 24K Gold plated deck
                • Adjustable airflow

                Black

                • 24mm diameter
                • 125mm overall height
                • Magnetic fire button
                • Billet red copper construction
                • Black frost finish coating
                • Internal insulation protection
                • Self-adjusting battery contact
                • Hybrid 510 connection
                • 24K Gold plated deck
                • Adjustable airflow
                In The Box

                1x CoilART Mage Mech Tricker Kit

                A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                More Details →

                CUSTOMER REVIEWS

                Based on 1 review Write a review
                Sold Out

                iJOY Zenith // 300W 50A

                $68.00

                Or 4x interest free payments of $17.00 NZD

                Brand iJoy

                This product is unavailable

                The iJoy Zenith is now available in NZ! A simple to use yet powerful triple battery mod that has a maximum wattage output of 300 watt with the IWEPAL chipset. Standout features include the adjustable voltage lightning knob which allows you to easily adjust your voltage on the fly, a large tactile fire button that is located on the top of device and a classic and durable chassis that is comfortable to hold and carry. The Zenith requires three high amp 18650 batteries (sold separately) and an external charger to charge your 18650 batteries (sold separately).

                • IWEPAL chipset
                • Spring loaded 510 contact pin
                • Maximum wattage: 300.0 W
                • Working voltage: 9.3V - 12.6V
                • Output voltage: 2.7V - 6.2V
                • Maximum output current: 50A
                • LED indicator light
                • Magnetic battery back cover
                • Low voltage alert
                • 10 second protection
                • Short circuit alert

                Specifications
                Size: 51mm x 41mm x 90mm
                Battery: 3x 18650 cells

                In the box
                1x iJoy MAXO Zenith Mod
                1x Manual

                A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous.

                More Details →

                CUSTOMER REVIEWS

                Based on 1 review Write a review
                Sold Out

                Geekvape Karma

                $54.00

                Or 4x interest free payments of $13.50 NZD

                Brand Geekvape

                This product is unavailable

                The Geekvape Karma polished copper mechanical mod with black accented button housing.
                • High grade copper
                • Treated to avoid oxidation
                • Magnetic button
                • Six air vents for heat dissipation and safety
                • Direct to battery hybrid 510 connection
                • 25mm x 84mm

                In the box
                1x Geekvape Karma Mechanical Mod
                1x User manual

                A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                More Details →

                CUSTOMER REVIEWS

                Based on 1 review Write a review
                Sold Out

                VGOD Pro Mech

                $124.00

                Or 4x interest free payments of $31.00 NZD

                Brand VGOD

                This product is unavailable

                The VGOD Pro Mech Mod is constructed of copper and treated with a durable matte black coating, the firing button features a self adjusting gold plated contact to ensure constant, efficient connectivity as well as minimising your tampering time when switching batteries by self adjusting.

                • Billet copper construction
                • Aerospace grade carbon fiber finished button
                • Durable matte coating
                • Deep engraving
                • Precision threading
                • Hybrid 510 connection
                • Self-adjusting gold plated battery contact

                A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                More Details →

                CUSTOMER REVIEWS

                Based on 1 review Write a review
                Sold Out

                Geekvape Karma Kit

                $83.95

                Or 4x interest free payments of $20.99 NZD

                Brand Geekvape

                This product is unavailable

                The Geekvape Karma Kit is an ultimate mechanical mod kit consisting of a polished copper mechanical mod and two (RDTA/RDA) atomisers in one. 
                • Combination of RDTA and RDA (interchangeable)
                • Adjustable side airflow control system
                • Velocity style deck, large post holes to fit larger coils
                • Large side e-juice fill port for a more convenient access
                • All in one kit
                • High grade copper
                • Direct-to-battery 510 connection
                • Heat-resistant wide bore drip tip
                Specifications
                Mod: 25mm x 84mm
                RDTA: 25mm x 46mm
                RDTA: 5ml tank reservoir

                RDA: 25mm x 30.5mm
                RDA: 2ml juice well

                In The Box
                1x Copper and black mechanical mod
                1x Karma RDTA/RDA tank
                1x Spare glass tube
                1x User manual
                Spare parts

                A sound understanding of ohm's law and battery safety is required for mechanical mods. Please contact us prior to purchase should you have any questions.

                More Details →