Digiflavor Drop Solo RDA // 22mm


Or 4x interest free payments of $14.25 NZD

Brand Digiflavor

The Drop Solo designed by The Vapor Chronicles is the latest game changing single coil RDA to hit NZ. A 22mm single coil version of the original 24mm Drop RDA - widely regarded as one of the best RDAs in the industry.

Featuring two large post holes which allow for easy coil placement and maximum build space with open access to trim excess wire, the post holes have also been designed with a notch to trap round wire builds with ease.

Stepped airflow design provides precise control while maintaining an ultra smooth, flavoursome, and whistle-free experience. A deep and levelled juice well allows for convenient dripping or squonking while minimising possibilities of leakage.

Two different caps are included in the box - the stainless steel cap provides more space and increased airflow, and maintains the original Drop RDA aesthetic, while the transparent cap will satisfy those who want a lower profile and reduced chamber benefits. A 24mm decorative base ring is included to create a seamless design with larger devices.

In The Box

1x Drop Solo RDA
2x 0.35Ω Coils
1x Bottom Feed Positive Pin
1x PMMA Mid Cap
1x PMMA Top Cap
1x PMMA 24mm Accessories
1x Drip Tip
1x 510 Drip Tip Adapter
1x Spare Parts Pack
1x Allen Key
User Manual

More Details →


Based on 1 review Write a review

Digiflavor Drop RDA // 24mm


Or 4x interest free payments of 25% on orders over $50

Brand Digiflavor

The Digiflavor Drop RDA, a collaboration between Digiflavor and The Vapor Chronicles has arrived in NZ. The Drop is a 24mm rebuildable atomiser with a unique four post build deck which allows for a range of different builds in single or dual coil configuration. The stepped airflow design can be adjusted by simply rotating the top cap, the Drop comes with two 810 style Goon drip tips and a 510 drip tip adapter is included along with squonk pin for bottom feed lushness.

  • Unique gold plated four post build deck with huge post holes
  • Adjustable stepped side airflow with many configurations
  • Suitable for dual and single coil builds (or even quads if you wanna get creative)
  • Accepts goon style 810 drip tips (includes 1x wide bore, 1x ULTEM drip tip)
  • Also includes a 510 drip tip adapter
  • Conical shaped top cap enhances flavour
  • 5mm deep juice well
  • Includes a bottom feeding squonk pin
  • Gold plated 510 pin, PEEK insulator
  • Height: 40mm, Diameter: 24mm

In The Box
1x Digiflavor Drop RDA
1x Wide bore 810 drip tip (preinstalled)
1x Slim ULTEM drip tip
1x 510 drip tip adapter
1x Squonk pin
1x T-tool screwdriver
Spare screw & o-ring spare parts pack
User manual

More Details →


Based on 1 review Write a review
Sold Out

Geekvape Radar RDA // 24mm


Or 4x interest free payments of 25% on orders over $50

Brand Geekvape

This product is unavailable

The Radar RDA by Geekvape is a newly designed 24mm dual coil rebuildable dripping atomiser and adopts an innovative and convenient build deck with 2 posts, 4 holes and deep juice well.

The Radar has a 5mm deep juice well, perfect for dripping or squonking your favourite e-liquid. Airflow enters the Radar through two dual slotted air slots, one measuring at 9.5mm by 2mm, the other measuring at 3mm by 1mm. A 10mm wide bore 810 delrin drip tip comes pre-installed on the Radar but can be switched off with the 10mm 510 delrin drip tip for user preference.

Check out the GBOX Squonk Kit // 200w than includes the regulated Geekvape GBOX squonk mod and Radar for the low price of $129.

  • 24mm Diameter
  • Additional Cooling Wide Bore Top Cap
    • Dual Airslots per Side
      • 3mm by 1mm per Airslot
  • Staggered Directional Post Build Deck
    • Two Terminal Per Post
      • 3mm Diameter Terminals
      • Top Mounted Allan Screws
    • 5mm Deep Juice Well
    • Double O-Ring Secured
    • PEEK Insulator
  • Dual Side Airslots
    • 9.5mm by 2mm Each
    • Fully Closeable
  • 10mm Wide Bore 810 Delrin Drip Tip
  • 10mm Bore Delrin 510 Delrin Drip Tip

  • In The Box

    1x Radar RDA
    1x User Manual
    Spare Parts Pack

    More Details →

    VGOD Elite RDA // 24mm


    Or 4x interest free payments of $16.00 NZD

    Brand VGOD

    The VGOD Elite RDA has landed in NZ! Offering the top tier in style, quality, and performance, the VGOD Elite RDA is designed by professionals, for professionals.

    Featuring beautiful American engineered hardware, the VGOD Elite RDA is the ultimate choice for serious vapers, flavour chasers, and trick benders.

    • VGOD engraved Elite RDA shield
    • Well depth 9.25mm
    • Well capacity 2ml
    • Hybrid friendly protruding gold plated 510 pin
    • 24mm Diameter
    • 33mm (less 510) Height

    Build Deck

    • Dual posts, 2mm hole
    • Finger tight nut, Philips or flat
    • Post hole spacing, ID 11mm

    In The Box
    1x VGOD Elite RDA
    1x Spare O-rings
    1x Multi Tool
      More Details →


      No reviews yet Write a review

      HellVape & Heathen Dead Rabbit RDA // 24mm


      Or 4x interest free payments of 25% on orders over $50

      Brand HellVape & Heathen

      The Hellvape Dead Rabbit 24mm RDA touches down in NZ featuring a 4 post design with 4 vertical 2.5mm terminals making it similar to a postless deck RDA. What sets this one apart from your average post-less build deck is the raised platform which makes it easy to insert coils and snip the leads from below. A PEEK insulated block for the best heat resistance, knurled cap to provide better grip when switching air flows to accommodate single or dual coil builds. When you add all that with a nice deep juice well, you’ll find that this atomiser was built to last and supremely made with the advanced vaper in mind.

      The airflow on this RDA is above where the coils will be placed while utilising a diagonal airflow design through the top cap that directs air flow right under your coils for maximum flavour. The airflow slots are 10mm wide and 2.5mm high, creating a lot of airflow for maximum vapour production. Teaming this feature with the included 10mm wide bore drip makes for a non-restricted pull for perfect clouds and a smooth vape.

      The Hellvape and Heathen team made this RDA usable by all types of vapers by including a squonk pin, allowing you to add this to your favorite squonk mod for vapers who find constant dripping a hassle. For those not about that squonk life, the Dead Rabbit RDA has a 5mm juice well and a high-positioned airflow for reduced leaking, so no need to worry about over-dripping on this RDA.

      Conductivity is important and this RDA doesn’t skimp on the details. With a gold-plated positive post and a stainless steel negative post, combined with the gold-plated 510 pin that protrudes, this RDA made the science of building aesthetically pleasant as well.

      Hellvape & Heathen have made an impressive & user-friendly RDA that any dripper can enjoy.

      Check out the Vandy Vape Pulse BF Squonk Mod here: Pulse BF Squonk Mod

      • 24mm rda with ample build space and generous post holes
      • Slide in top coil deck takes the guesswork out of pre cutting your coil leads
      • Adjustable top side diagonal airflow with a focus on flavor and to minimize leaking
      • Single or dual coil configurations
      • 304 grade stainless steel
      • 5ml eliquid well
      • Secured by Double O-Rings
      • Gold plated, PEEK insulated positive post for better conductivity
      • Knurled grip to adjust the airflow with ease
      • Post screws fasten to the flat side of the coil lead to preserve your build
      • Bottom feeding pin included for squonking
      • Two 810 driptip options including a resin tip and a 510 adapter
      • Slotted or hex head post screw options
      • Protruding 510 pin and peek insulation for hybrid top cap compatibility

      In The Box
      1x Dead Rabbit 24mm RDA
      2x 810 Resin Drip Tips (10mm Bore)
      1x 510 Adapter
      1x Gold Bottom Feed Pin
      4x Hex Screws
      1x Orings
      2x Hex Screwdrivers

      More Details →

      VandyVape Bonza RDA // 24mm


      Or 4x interest free payments of 25% on orders over $50

      Brand Vandy Vape

      Vandy Vape and The Vaping Bogan bring us the new Bonza RDA and this masterful design that's recently arrived in New Zealand is going to give a few leading international manufacturers a run for their money.

      The Bonza 24 RDA is a bottom fed dripping atomiser designed by The Vaping Bogan. It features gold plated fixed screw clamp post building deck for convenient and easy single and dual coil building. With the concentrated side air-flow system, it brings you the dense flavour. The Vandy Vape Bonza 24 RDA uses the popular 810 drip tip system and comes with a ULTEM wide-bore drip tip, a Delrin wide bore smooth drip tip and a 510 drip tip adapter, which was designed for maximising flavour and vapour production in a leak resistant platform ideal for your bottom feeding squonk setup. 

      Check out the VandyVape Pulse BF Squonk Mod here: Pulse BF Squonk Mod

      • Fixed screw clamp post with dual coil design
      • Side airflow system brings great flavor
      • Food grade resin drip tip
      • Standard 510 pin and squonk pin included
      • 510 drip tip adapter included
      • Capacity: 2ml
      • Length: 25.5mm
      • Diameter: 24mm
        In The Box
        1x Bonza RDA
        1x Squonk Pin

        1x 510 Drip Tip Adapter
        1x 16mm Delrin Drip Tip
        1x 17.5mm Ultem Drip Tip
        1x Accessory Bag
        1x User Manual

          More Details →


          Based on 2 reviews Write a review

          Vandy Vape Pulse 24 BF Squonk RDA // 24mm


          Or 4x interest free payments of $14.50 NZD

          Brand Vandy Vape

          Retaining similar aesthetics from the original with a simple yet elegant appeal, the latest RDA in NZ from Vandy Vape, the Pulse 24 measures 24.4mm in diameter, innovative airflow style returns with side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes and acting as a leak resistant feature due to the angled orientation.

          The Pulse 24 BF integrates a quad terminal postless design, large terminal openings set into the deck and tightened via side-secured Phillips screws. The deck and chamber accommodates a wide range of large coil structures and a large liquid well. The well is cleverly designed for an efficient squonk-ready set-up with the included bottom-feeding 510 pin that feeds directly into the two sides of the juice well.

          Check out the Pulse BF Squonk Mod here: Pulse BF Squonk Mod

          • Deep Juice Well
          • Innovative Postless, Quad Terminal Design - Dual Coil Version
          • PEEK-Insulated Positive Terminal Post
          • Dual Coil Configurations
          • Side-Mounted Kennedy-Style Airflow
          • Dual Slotted Side Airslots
          • Quad Airflow Tubes Inside Chamber
          • 16mm Wide Delrin Widebore Drip Tip
          • 17.5mm Wide ULTEM Widebore Drip Tip
          • 510 Drip Tip Adapter
          • Bottom-Feeding Squonk-Ready 510 Pin Set-Up
          • Gold-Plated 510 Contact Pin
            In The Box
            1x Pulse 24 BF RDA
            1x 16mm Delrin Widebore Drip Tip
            1x Squonk-Ready 510 Pin
            1x 510 Drip Tip Adapter
            Spare Parts & O-Rings
              More Details →

              dotMod dotRDA // 24mm


              Or 4x interest free payments of $24.00 NZD

              Brand dotMod

              DotMod's eagerly anticipated dotRDA 24mm has just touched down in NZ! The dotRDA 24's spring loaded terminal has a large 1.5mm by 3.9mm clamping space that's secured by a single phillips screw and is capable of running single and dual coil build options. The liquid well measures 4.8mm deep, airflow of the the dotRDA is by it's dual adjustable side airslots that measure at 7mm each and can be run in single or dual coil mode.

              An included proprietary threaded ULTEM drip tip resists heating, allowing for hotter builds without a hot drip tip. A bottom feed pin is included dotRDA, converting the RDA into a bottom feeding atomiser and dotmod's dotKey tool, which allows the RDA to be completely built or disassembled with just the dotKey itself. 

              • Revolutionary new spring loaded single post design
              • 24K gold plated brass deck
              • Adjustable airflow control
              • Beautiful hard-anodized aluminum barrel and cap
              • Squonk and Drip ready with interchangeable center pins
              • Huge 1.5mm x 3.9mm Clamping space to accommodate your gnarliest builds
              • Easy-drip three piece design
              • Huge juice well 4.8mm deep
              • Can be completely built or disassembled with the included dotKey, no more guess work to find the correct driver
                  In The Box

                  1x dotRDA 24mm
                  1x dotKey (Screwdriver)
                  1x Squonk-Ready 510 Pin
                  2x Prebuilt Fused Clapton Coils
                  1x Certificate of Authenticty
                  Spare Parts & O-Rings

                  More Details →
                  Sold Out

                  Goon V1.5 RDA // 24mm


                  Or 4x interest free payments of $24.50 NZD

                  Brand 528 Custom Vapes

                  This product is unavailable

                  • 24mm
                  • Larger build space vertically and horizontally than the Goon V1 
                  • Cyclops airflow
                  • Domed interior top cap for better flavor
                  • Wide Bore drip tip
                  • Standard 510 connection
                  • Gold plated brass 510 pin
                  • Stainless steel bridge post
                  • Stainless steel clamps 
                  • Stainless clamp screws
                  • Hybrid safe 
                  • Peek insulators
                  • Positive and Negative bridges are easily replaceable
                  • PVD Coated Stainless Steel
                  In The Box
                  1x Set Of Allen Key Screws
                  1x Allen Key
                  1x Set of Hybrid Phillips/Flathead Screws
                  1x Stainless Steel Squonk Pin

                  Spare O-rings

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review
                    Sold Out

                    dotMod Tiffany Blue Petri V2 RDA - Limited Edition // 22mm


                    Or 4x interest free payments of $29.50 NZD

                    Brand dotMod

                    This product is unavailable

                    The Petri V2 RDA by Dotmod implements a two-post design into a PEEK insulated deck, 24K gold plated terminals, knurled screws, and a beautiful anodised aluminum three-piece form factor.

                    • 22mm Diameter
                    • Anondised Aluminum Construction
                    • Side-Tension Vertical Two-Post Design
                    • Gold-Plated Terminals
                    • 3mm by 2mm Terminal Posts
                    • Knurled Screws
                    • PEEK Insulated Build Deck
                    • Delrin Widebore Drip Tip
                    • 510 Drip Tip Adaptor Included
                    • Dotmod Signature Engraving
                    • Gold-Plated Copper 510 Contact
                      In The Box

                      1x dotMod Petri V2 RDA
                      1x dotMod Tiffany Blue Friction Fit Drip Tip
                      1x Allen Key
                      Extra O-Rings
                      Authenticity Code

                      More Details →
                      Sold Out

                      Apocalypse Gen 2 RDA // 24mm


                      Or 4x interest free payments of $32.00 NZD

                      Brand Armageddon MFG

                      This product is unavailable

                      Apocalypse Gen 2 24mm RDA’s have landed in New Zealand! Authentic, American made RDA’s from Armageddon Manufacturing, renowned for their design, engineering, precision machining and attention to detail.

                      Gen 2 Apocalypses come individually serialised to ensure you’re guaranteed an authentic product. With a massive 21mm clamp style gold plated build deck with long screws giving it a total wire space of 13mm, this is the perfect RDA to put those huge builds in!

                      These RDA’s are made with a revolutionary Teardrop Airflow System, making it the most customisable airflow we’ve seen yet on an RDA and ensures the best possible vaping experience. Available in a range of different colours and finishes, with a special drip tip (compatible with Goon and TFV8 tanks) to make the perfect colour combination.
                      • Gold Plated Deck
                      • Oversized Bridge Clamps
                      • 21mm Build Deck
                      • 4mm Deep Juice Well
                      • 13mm Total Wire Space Under Clamps
                      • PEEK Insulated Positive Post
                      • Fits Any 12.4mm Drip Tip
                      • 5mm Airflow Teardrop Configuration To Give Maximum Customisation And Control
                      • Wide Bore Drip Tip
                      • Lengthened Screws
                      • Serialised
                      • Embroidered Felt Pouch
                      More Details →
                      Sold Out

                      Goon LP RDA // 24mm


                      Or 4x interest free payments of $24.50 NZD

                      Brand 528 Custom Vapes

                      This product is unavailable

                      The Goon LP RDA by 528 Customs is the modern redesign of the critically acclaimed Goon RDA. Expanding the build deck capability by implementing a new four clamp horizontal system while also including an ULTEM cap and drip tip.

                      Maintaining the 24mm diameter of the original Goon, the Goon LP features a shorter overall height to create a more balanced visual aesthetic while also increasing the rate of airflow delivery during use. Inside, the Goon LP features a newly redesigned two post clamp style deck, with two horizontally mounted clamps per post, increasing overall efficiency and customization versus the shared terminal design of the original. The deck measures 3mm deep, with engravings located in both wells.

                      Airflow enters the Goon LP through two 11mm by 2mm airslots that are throttled by adjusting the AFC top cap. Included in each set is a full ULTEM top cap that mirrors the stock stainless steel while benefitting from the excellent combination of extreme heat resistance and durability within a lightweight and transparent material. With either cap, the Goon LP utilizes an 10.5mm bore ULTEM drip tip. Extending capability further, the Goon LP also includes a stainless steel squonk ready center pin that allows each RDA to be utilized with squonk systems.

                      Presenting an excellent balance of high quality craftsmanship, ambitious yet efficient designs, and top notch materials, 528 Customs' Goon LP RDA is a must have for any enthusiast and serious builder. 

                      • Low Profile Edition
                      • 24mm Diameter
                      • 3mm Deep Juice Well
                      • Superior Stainless Steel Construction
                      • Innovative Side Four-Post Bridge Clamp Design
                      • One Static Gold-Plated Bridge Post
                      • Four Gold-Plated Bridge Clamps
                      • PEEK Insulators
                      • Adjustable Airflow Control
                      • Dual Slotted Airflow Design
                      • Unique Serialized Number
                      • CNC Engraved
                      • ULTEM Widebore Top Cap
                      • Squonk Ready 510 Connection
                      • 24K Gold-Plated 510 Connection
                      • Hybrid Safe
                      In the box
                      1x Goon LP RDA
                      1x Ultem Sleeve
                      1x Ultem Drip tip
                      1x ULTEM Cap
                      1x Squonk Ready 510 Bottom Feed Pin

                      Spare Parts and O-Rings

                      More Details →
                      Sold Out

                      N22 // 21mm


                      Or 4x interest free payments of $34.75 NZD

                      Brand Sector One Vapors

                      This product is unavailable

                      Stunning design, exceptional engineering, machining and quality of vape. The N22 has received reviews as one of the most highly acclaimed rebuildable dripping atomisers produced to date.

                      • 304 stainless steel
                      • 21mm base diameter
                      • 22mm overall diameter
                      • 7mm juice well
                      • Solid negative poles
                      • AFC top cap
                      • Copper 510 contact
                      • 2.5mm positive pole hole
                      • 2mm negative pole holes
                      • 1.5mm x 8 internal air holes
                      • Peek insulator
                      • Deep machine engraved
                      More Details →

                      Customer Reviews

                      Based on 3 reviews Write a review