Tesla Invader IV Kit / Invader IV RDA // 280W

$129.00

Or 4x interest free payments of $32.25 NZD

Brand Teslacigs

The Tesla Invader IV 280W Kit has arrived at The Vape Shop NZ. With the massive success of its predecessor, Teslacigs have released their new, lighter VV Tesla Invader IV with Invader IV RDA. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. Plus the innovative Invader 4 RDA which features convenient dual coils build deck, adjustable bottom airflow system and Resin wide bore drip tip, the Teslacig Invader IV Kit is definitely an excellent vape device.

With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The Invader IV has a maximum power output of 280W. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

  • Dimension: 92 x 60 x 28mm
    • Material:  Aluminium alloy
  • RDA Dimensions: 25 x 34mm
    • Dual post build deck
  • Cell Type: Two high-drain 18650/20700/21700 cells
    • Batteries Sold Seperately
  • Maximum Output Wattage: 280W
    • Voltage Adjust: I-V level
    • Output Voltage Range: 3-8V
    • Maximum Output Current: 53A
  • Resistance Range: 0.08ohm-3.0ohm
    • Input Voltage Range: 6.4V-8.4V
    • Standby Current: <50uA 
    • USB: 5V/1.5A
  • LED Indicator: Blue-Green-Red
  • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
  • Thread: 510

In The Box

1x Invader 4 Mod
1x Invader 4 RDA
2 x Wires
3 x Silicone Rings
1x Wrench
4 x Screws
Organic Cotton
USB Cable
2 x User Manuals
      More Details →

      CUSTOMER REVIEWS

      No reviews yet Write a review

      Wotofo X Mike Vapes Recurve Squonk // 80W

      $89.00

      Or 4x interest free payments of $22.25 NZD

      Brand Wotofo

      The Wotofo x Mike Vapes collaboration brings you the Recurve 80W Squonk Mod. A semi-mechanical, incredibly ergonomic mod that fits snug into anyones hand. The Recurve Squonk Box mod is made with a combination of zinc alloy and a rubberised coating that blends it smooth and curvy lines with a comfortable texture that makes it excellent for all day use.

      Compatible with single 18650, 20650, and 2X700’s with two seperate battery adapters to accommodate for varying sizes.

      The Recurve has a resistance range of 0.08Ω - 3.0Ω that will automatically adjust wattage output based on remaining battery charge.

      Featuring a magnetic panel covering the 8mL bottom feed bottle, this allows for mess free removal and refilling without disrupting your battery. There is an LED light strip indicator located behind the squonk bottle in order to indicate various states of the device. The LED light will stay on during charging and will turn off once the battery is at maximum charge. The Recurve supports 2A on board charging, but we recommend for ensuring safety and longevity of your batteries to charging externally.

      • Proprietary Chip
        • Power Output Based on Current Battery State
        • 80W Maximum Output
        • 3.2 to 4.2V Output Voltage
        • 0.08 to 3.0 Atomiser Range
      • Bottom Feed Bottle
        • 8ml Maximum Capacity
        • Knurled Delrin Cap
        • Removable Magnetic Panel
      • LED Light Indicator
        • Behind Squonk Bottle
        • Blinks 5 Times To Indicate Short Circuit
        • Blinks 10 Times To Indicate Low Voltage
        • LED Light Stays On To Indicate Overheating
        • Blinks Once To Indicate No Atomiser Detected
        • LED Stays On When Charging And Turns Off At Full Charge
      • Single 18650/20650/20700/21700 Battery Powered
        • Removable Magnetic Battery Panel
          • Battery Sold Separately
      • Single Button Control Face
        • Oversized Firing Button
      • Micro USB Charging
        • 2A Max Charge Rate
      • Rubberised Zinc Alloy Construction
      • PCB Circuit Board
        • Short Circuit Protection
        • Low Voltage Protection
        • Overheating Protection
        • 10 Second Auto Cutoff Protection
        • Reverse Polarity Protection
        • Over Charging Protection
        • Over Discharging Protection
      More Details →

      Uwell Nunchaku Mod // 80W

      $99.00

      Or 4x interest free payments of $24.75 NZD

      Brand Uwell

      Enter the dragon with this innovative new design from Uwell - now available in New Zealand!

      The Uwell Nunchaku lets you vape like a ninja with its sleek, discreet design that hides away with ease and packs a serious punch. This device is loaded with features including a proprietary chipset allowing for V/W mode (5w - 80w), temperature control mode (Ni, SS), and bypass mode.

      With the power of an 18650 external battery, the convenience of on-board USB charging, and a maximum direct output of 7 volts the Nunchaku is an absolute weapon making it a must have for any vape warrior.

      • Power range: 5-80W
      • A new generation of e-cigarette control panel by Uwell independent R&D, makes the tube as safe as a box mod.
      • Multiple work modes: power mode, TC mode (NI,SS), bypass mode.
      • Requires one replaceable high-drain 18650 battery (sold separately).
      In The Box
      1× NUNCHAKU 80W Mod
      1× Micro USB Cable
      1× User Manual
      More Details →

      CUSTOMER REVIEWS

      Based on 5 reviews Write a review

      Tesla Invader IV Mod // 280W

      $109.00

      Or 4x interest free payments of $27.25 NZD

      Brand Teslacigs

      The Tesla Invader IV 280W Mod has arrived at The Vape Shop NZ. With the massive success of its predecessor, TeslaCigs have released their new, lighter VV Tesla Invader IV. Now compatible with dual 21700, 20700 or 18650 batteries, essentially improving the potential battery life, while retaining the same performance of high drain 18650s. 

      The Invader series are an incredibly durable range of mods that are built to last. With more range of power on the 5 step potentiometer and increased resistance range, the Invader IV is able to run between 3-8 volts and down to 0.08Ω.

      The highly anticipated Tesla Invader IV is one of the most reliable, hard hitting mods on the market. While the Invader IV hits like a series mechanical mod, it still has the safety features of a standard regulated mod without all the bells and whistles getting in your way. 

      With incredible efficiency and no nonsense design, the Tesla Invader IV is the perfect choice for people who want unadulterated power and ease of use. The  The Invader IV has a maximum power output of 280W, and fires down to a super low 0.08ohm. The Invader IV also supports USB input charging, so you don't need to rely on an external charger to charge your batteries.

      We advise a thorough understanding of ohm’s law for using this variable voltage device. You will need to calculate the correct voltage to achieve the wattage level that your coil/s require.

      • Dimension: 92 x 60 x 28mm
      • Material:  Aluminium alloy
      • Cell Type: Two high-drain 18650/20700/21700 cells
      • Maximum Output Wattage: 280W
      • Voltage Adjust: I-V level
      • Output Voltage Range: 3-8V
      • Maximum Output Current: 53A
      • Resistance Range: 0.08ohm-3.0ohm
      • Input Voltage Range: 6.4V-8.4V
      • Standby Current: <50uA 
      • USB: 5V/1.5A
      • LED Indicator: Blue-Green-Red
      • Protections: Over puffing protection, reverse connection protection, atomizer short-circuit protection, low voltage alert, overheat protection, over-current protection 
      • Thread: 510

      In The Box

      • 1x Invader IV Mod
      • 1x USB Cable
      • 2x 18650 Adapters 
      • 1x Information Card
      More Details →

      CUSTOMER REVIEWS

      No reviews yet Write a review

      Vaporesso Armour Pro Mod // 100W

      $78.00

      Or 4x interest free payments of $19.50 NZD

      Brand Vaporesso

      Introducing Vaporesso's latest powerhouse to NZ - the Armour Pro. Beautiful, sophisticated, and elegant, the Armour Pro's clean lines and simplicity belie a powerful Omni Board 4.0 chipset capable of a maximum output of 100W.

      A 0.96 inch colour screen displays essential information to the user, such as: wattage/temperature, atomiser resistance, and individual battery life display. The screen itself is built into the firing button and blends seamlessly into the Armour Pro's luxurious form and function.

      The Armour Pro is powered by a single 18650 battery, or can also utilise 20700/21700 batteries for users requiring extended battery life. The advanced Omni Board 4.0 chipset features six different output modes, multiple protection systems, and can utilise 2A quick charging - no need to wait all day for your batteries to charge!

      With an incredible 0.002s firing speed and a total atomiser resistance range of 0.03 - 5.0Ω, the Armour Pro will have you enjoying pure, rich flavour and smooth, silky clouds all day!

      • 5 to 100W Output
        • OMNI Board 4.0
          • Six Total Output Modes
          • Insta-Fire
            • 0.002 Second Firing Speed
          • Super Player Mode
            • 0.03 to 5.0Ω Atomiser Resistance Range
        • 0 to 8.5V Voltage Range
        • Smart VW
          • Automatically Recommend Ideal Output
          • Can Easily Adjust
        • Customised Curve of Wattage (CCW)
          • Customise Wattage Output By Second Increments
          • Customise Ramp Up by 0.5 Second Increments
        • Customised Curve of Voltage (CCV)
          • Customise Voltage Output By Second Increments
        • Bypass Mode
        • Firmware Upgradeable
      • Temperature Control Suite
        • Ni200 Nickel Support
        • Titanium Support
        • SS316 Support
        • Customized Curve of Temperature (CCT)
          • Customize Temperature Output Over Time
        • TCR Mode
        • 200 to 600 Degrees Fahrenheit
        • Atomiser Lock
      • Magnetized Battery Bay Access
        • Single 21700/20700/18650 Battery Powered (sold separately)
      • Sleek and Beautiful Chassis Design
        • Futuristic Styling
      • Four Button Control
        • Oversized Firing Button
          • Screen Integrated Into Firing Button
        • Angular Adjustment Buttons
        • Mode Button
      • 0.96" Inch TFT Display
        • Temperature Mode and Output
        • Output Power
        • Atomiser Resistance
        • Individual Battery Life Indicator
          • Remaining Charging Time (RCT)
        • Puff Counter
      • 2A Quick Charge System
        • Remaining Charging Time
        • Equalising Charge System
        • USB Input Protection
      • Micro USB Charging Port
      • In-Mould Labeling (IML) Injection Coating and Aluminum Alloy Chassis
      • Spring Loaded Gold Plated 510 Connection
      • Burn Protection/Overtime Protection/ Overcharge Protection/ No Load Protection/ Low Resistance Protection/ ESD Circuit Protection/ Short-Circuit Protection/ Low Power Protection/ Pass-Through Protection
        In The Box
        1x Vaporesso Armour Pro 100W TC Box Mod
        1x Micro USB Charging Cable
        1x Battery Adapter
        User Manual and Warranty
          More Details →

          CUSTOMER REVIEWS

          No reviews yet Write a review

          Ohm Boy X Desire Designs Rage Squonk // 155W

          $167.00

          Or 4x interest free payments of $41.75 NZD

          Brand Ohm Boy X Desire Designs

          Desire Designs collaboration with Ohm Boy, the Rage 155W Squonk mod has arrived at The Vape Shop NZ. A dual 18650 powered squonk box mod with a maximum output of 155W, sophisticated and classy design, temperature control suite, and a quarter turn and pull 7mL squonk bottle.

          The Rage Squonk has a three button design with an intuitive mounted display screen that displays the essential factors that vapers need to see. A solid stainless steel 510 connector with spring loaded gold plated center squonk pin for optimal conductivity. Supporting Nickel, SS316, Titanium, and Bypass mode

          The high amperage 18650 batteries are housed through the magnetic battery door of the Rage Squonk, the 7ml squonk bottle is housed on the front of the device and can be removed by a small notch, atop the squonk bottle features a knurled threaded cap.

          The Ohm Boy X Desire Rage Squonk 155W is a phenomenal device to pick up for the pure power and the aesthetically pleasing look and feel.

          Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries. 

          • 5 to 155W Output Range
            • 0.08 to 3Ω Atomiser Range
            • 40A Max Output Range
          • Temperature Control Suite
            • Ni200 Nickel Support
            • Titanium Support
            • SS316 Support
            • Bypass Support
            • 200 to 600 degree Fahrenheit Range
          • 0.69 inch Mounted OLED Screen
            • Diagonal Arrangement
            • Output Temperature
            • Output Wattage
            • Output Voltage
            • Material and Mode Selection
            • Atomiser Resistance
            • Output Current
            • Battery Life Indicator
            • Screen Flip
          • 7mL Squonk Bottle
            • Quarter Turn Pull
            • Knurled Top
          • Three Button Control Face
            • Oversized Firing Button
          • Magnetic Battery Door
            • Accepts Dual High Amperage 18650
              • Batteries Sold Separately
            • USB Port
              • Update
              • Charge up to 1A
          • Stainless Steel Plated 510 Threading and Firing Pin
            • Spring Loaded Gold Plated Center Pin
          • Short Circuit Protection/ Over Charging Protection/ Auto Lock Protection/ Low Voltage Protection/ Over Vaping Protection

           


          In The Box
          1x Ohm Boy X Desire Rage Squonk 155W TC Box Mod

          1x Micro USB Cable
          1x Manual and Warranty Card

            More Details →

            CUSTOMER REVIEWS

            No reviews yet Write a review

            Innokin Proton Mod // 235W

            $98.00

            Or 4x interest free payments of $24.50 NZD

            Brand Innokin

            The Innokin Proton mod has just arrived to The Vape Shop NZ. The Proton is a 235 watt high-performance box mod with a first of its kind joystick style selector and 1.45” TFT colour screen display which supports 6 colours.

            Unlike anything you’ve seen from Innokin, every component, texture, and material of Proton underwent a complete design overhaul to bring you not only the high quality you expect from Innokin but the innovation factor that stems from its namesake as well. 

            In short, the Proton is all about customisation and user experience. It’s quality made affordable.

            • 6 to 235W Wattage Output
              • 0.05 to 3.5Ω Atomiser Resistance Range
            • Temperature Control Suite
              • Ni200 Nickel Support
              • Titanium Support
              • Stainless Steel Support
              • Curve Support
              • TCR Support
              • Bypass Support
              • 300 to 600 Degrees Fahrenheit Output Range
              • 1.45" TFT Screen Display
                • Output Wattage or Temperature
                • Output Timer
                • Output Voltage
                • Mode and Heating Element
                • Individual Battery Life Indicator
                • Atomiser Resistance
                • Lock Indicator
                • Puff Counter
              • Six Menu RGB Customisation
                • Blue
                • Red
                • Green
                • Pink
                • Purple
                • White
              • Dual Control Interface
                • Oversized Grip Style Fire Button
                • Analog Control Adjustment Interface
              • Slide to Open Bottom Latch Battery Access Door
                  • Accepts Two High Amperage 18650 Batteries
                    • Sold Separately
                  • Micro USB Charging
                    • 5V/2A
                • Stainless Steel 510 Threading
                • 24K Gold Plated Spring Loaded 510 Connection

                Proton Mod Dimensions

                • 85mm by 44.6mm by 29.6mm
                In The Box
                1x Proton 235W Mod
                1x USB Charging Cable
                1x User Packet (QR Code, Quick Start Guide, Warranty Card, Warning Booklet, Battery Warning Card, Stickers)
                  More Details →

                  CUSTOMER REVIEWS

                  Based on 1 review Write a review

                  VGOD Pro 200 Kit // 5mL

                  $218.00

                  Or 4x interest free payments of $54.50 NZD

                  Brand VGOD

                  New to NZ, VGOD introduces the Pro 200W Kit - a quality and performance regulated output device that delivers the perfect combination of power, style and comfort along with the VGOD Pro Subtank.

                  Escape to a world of style and function. It is designed for extreme versatility to give you everything you need in one box. The Pro 200 Kit along with the Subohm tank is equipped for high performance and intensified flavour. Built to withstand your active lifestyle and always look good doing it.

                  The Pro features an elegant matte black finish followed by a zinc alloy body with brushed stainless steel and rubberised grips. The dual 18650 batteries (sold separately) are housed with a side panel door and features a rapid micro USB charging dock.

                  Proprietary ATOM.V.200B chipset technology, a temperature control suite, a MECH mode that builds as low as 0.7Ω, 20 memory banks, and a Power Curve Mode provide exceptional output control. The device has a 0.96 inch coloured OLED Screen that displays various types of information and can be customised by the users.

                  A three button control face is utilised with the trigger being behind the atomiser. Along with the VGOD Elite 200W TC Box mod is the Elite Subtank, a 24mm sub-ohm tank with a 3ml capacity of e-liquid.

                  The Elite Subtank utilises the Shotgun Coil head which comes in 0.2Ω, rated at 30 to 100W and recommended at 60W. The Elite Subtank is top fill and can accommodate up to 3mL of e-liquid. With its modern design and smooth, comfortable feel, the VGOD Pro 200 Kit is a great choice for those who dare to rise above.

                  Please Note: Batteries must be matched in brand, model and battery state at all times. Discharge and recharge batteries within the same grouping of two. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries.

                  • 7 to 200W Output Range
                    • 0.08 to 3.0Ω Atomiser Resistance Range
                    • Proprietary ATOM.V.200B Chip technology
                  • Temperature Control Suite
                    • Ni200 Nickel Support
                    • Titanium Support
                    • Stainless Steel 316 and 304 Support
                    • MECH mode
                    • Resistance Lock
                    • Pro Mode
                      • Up to 7 Seconds Adjustable Wattage in 1 Second Intervals
                    • Memory Mode
                      • Up to 20 Memory Can Be Stored
                    • 200 to 600 degree Fahrenheit Range
                    • 0.07 to 3.0Ω Atomiser Resistance Range
                  • New Power Curve Mode for Exceptional Output Control
                  • 0.98 inch Side Mounted Colored OLED Screen
                    • Vertical Arrangement
                    • Output Temperature
                    • Output Wattage
                    • Output Voltage
                    • Material and Mode Selection
                    • Atomiser Resistance
                    • Output Current
                    • Dual Battery Life Indicator
                    • Adjustment Lock
                  • Three Button Control Face
                    • Oversized Firing Button
                  • Slide On Battery Bay
                    • Accepts Two High Amperage 18650 Batteries
                      • Batteries Sold Separately
                    • Micro USB Charging Port
                  • 24K Gold Plated 510 Threading and Firing Pin
                    • Spring Loaded Gold Plated Contact


                  VGOD Pro 200 Dimensions

                  • 85mm x 27mm x 57mm

                   

                  VGOD Pro Subtank Features

                  • 24mm Diameter Base
                  • Hinge and Lock Top Fill System
                    • Swivels Open and Shut
                    • Dual Fill Port
                  • 3ml Max Standard Capacity
                  • Shotgun Coil Family
                    • 0.2 ohm
                    • 30 to 100W
                    • 60W Recommended Range
                  • Dual Adjustable Airslots
                  • Stainless Steel and Glass Construction

                  In The Box
                  One VGOD PRO 200 Box Mod

                  One VGOD Pro Subtank
                  One 0.2 ohm Shotgun Coil
                  One Spare Glass
                  One User Manual

                    More Details →

                    CUSTOMER REVIEWS

                    Based on 1 review Write a review

                    Uwell Whirl 22 Vape Pen Kit

                    $64.00

                    Or 4x interest free payments of $16.00 NZD

                    Brand Uwell

                    The Uwell Whirl 22 follows the philosophy of a simple one button design built within a portable pen-style device. The Whirl 22 is the larger and higher capacity version of the slimmer Uwell Whirl 20 kit, with a larger 22mm diameter, an expanded 1600mAh built-in battery and a 2.0ml e-liquid capacity with top fill design.

                    The Whirl 22 features a quartz glass tank with a metal sleeve design, utilises NiChrome 0.6Ω atomiser heads that have been optimised for flavor and vapour production. A five airflow hole design can be adjusted to your personal preferences.

                    Purchase replacement coils here: UWELL Whirl Coil Pack

                    • All In One Design
                    • Diameter: 22mm, Height 117mm
                    • Built-in 1600mAh Battery
                    • Max Wattage: 25W
                    • Voltage Range: 3.0 - 3.8V
                    • E-Liquid Capacity: 2.0ml
                    • Bottom Fill Design
                    • Plug and Pull Atomiser Head Replacement Design
                    • Simple One Button Design
                    • Battery Life Indicator Light
                    • Glass Tank With Metal Sleeve
                    • Stainless Steel Construction
                    • Quartz Glass
                    • Bottom Adjustable Airflow Control Valve
                    • Includes (2) Whirl NiChrome 0.6ohm Coil Atomiser Heads
                    • Bottom Micro USB Charging Port
                    • 510 Drip Tip Compatible
                    • Resistance Range: 0.6 ± 0.1Ω
                    • Offers MTL Vape & DTL Vape
                    • Top Fill

                        In The Box

                        1x WHIRL 22 kit (exclude coil)
                        1x Extra quartz glass
                        2x 0.6 ohm coils
                        1x Pack of replacement O-rings
                        1x Micro-USB cable
                        1x User Manual
                        1x Drip tip cover (covers and protects tip when not in use)

                        More Details →

                        CUSTOMER REVIEWS

                        Based on 1 review Write a review

                        iJoy Zenith 3 Mod / 300W // Includes 2x 20700 Batteries

                        $98.00

                        Or 4x interest free payments of $24.50 NZD

                        Brand iJoy

                        The Zenith 3 is the latest dual 20700 battery semi-mechanical box mod to land in NZ. Presenting with a unique easy to grip shape with hard lines and gorgeous colour accents, it features a voltage adjustable knob with 16 voltage levels from 2.4V-6.9V.

                        The Zenith 3 box mod’s chipset is designed by IWEPAL and features short circuit protection, low power protection, reverse battery protection and has milliseconds fire speed with a maximum output of 300W and 50A discharge.

                        The device is simple to operate, no overhang with large atomisers, supports USB charging, and is compatible with 20700 batteries for longer life. An 18650 battery adapter is included. 

                        • Max Wattage: 300W
                        • Size: 92*49*34.5mm 
                        • Dual 20700 batteries mod with long battery life
                        • Semi-mechanical High power Box Mod
                        • 360 degree Adjustable Voltage Knob
                        • 16 voltage levels to adjust from 2.4-6.9V
                        • Screenless Design - Efficient Battery Use
                        • Various protection
                        • Large side fire button
                        • Resistance Range: 0.05~3.0 ohm
                        • USB port charging support
                        In The Box
                        1x IJOY Zenith 3 Box Mod
                        2x 20700 3000mAh High Drain Batteries
                        1x 18650 Adapter
                        1x USB Cable
                        1x Manual
                        1x Warranty Card
                        More Details →

                        CUSTOMER REVIEWS

                        Based on 1 review Write a review

                        Venvii Baby Ness 120W // 21700

                        $138.00

                        Or 4x interest free payments of $34.50 NZD

                        Brand Loch Ness

                        From ergonomics to ease of use, nothing fits in your hand and performs like the Baby Ness.

                        Based off the highly sought after stabilised wood mods, the originals would sell on auctions for $5,000-$8,000. We are excited to bring you the same amazing experience, at a fraction of the cost.

                        As its predecessor, the Baby Ness shares a similar appearance with the Loch Ness. But the Baby Ness is compatible with 21700, 20700 and 18650 batteries, bringing a large range of cell selection. 

                        Simplicity and function are at the forefront of this offering. The ease of use and rock-solid design make this a winner. The mod will easily accept a 26mm atomiser without overhang so your atty options are endless.

                        Venvii is yet again producing a simple, elegant and above all solid performing mod. It does exactly what it is supposed to do without flashing lights and speedometers.

                        • Ergonomic design for comfortable grip
                        • Various battery protections
                        • Tri-button design for easy operation
                        • 2A quick charging
                        • Firmware upgradable
                        • Dimensions: 90 x 42 x 30mm
                        • Temperature range: 200–600℉ / 100–300℃
                        • Wattage range: 5-80W - 18650, 20700 cell, 5-120W - 21700 cell
                        • Supported resistance range: 0.05-2.0Ω 
                        • Voltage output range: 0.5-8.5V
                        • TC modes: Ni200/titanium/tungsten/SS304/SS316/SS317/TCR/TFR
                        • Wattage Mode: boost(preheat), smooth, curve, normal
                        • Battery: 1x 21700 cell (discharging current should be above 40A) / 1x 20700/18650 cell (discharging current should be above 35A) (not included)

                        Warning: Only use high-discharge batteries in the Baby Ness. Battery specifications must be able to handle the high output load. You must select the correct output setting in relation to the battery you are using in the device, 35A+ for 18650 / 20700 and 40A+ for 21700 mode. Do not use batteries above the manufacturer recommended rated output as it can cause damage or even failure to the battery and result in fire or explosion.

                          In The Box
                          1x Venvii Baby Ness 120W
                          1x 18650 Battery Adapter
                          1x User Manual

                          More Details →

                          CUSTOMER REVIEWS

                          No reviews yet Write a review
                          Sold Out

                          Aspire Breeze 2 AIO Pod Kit

                          $54.00

                          Or 4x interest free payments of $13.50 NZD

                          Brand Aspire

                          This product is unavailable

                          The latest All-In-One (AIO) device from Aspire, The Breeze 2 has arrived in NZ!

                          The Breeze 2 takes AIO devices to a much-improved level. With the success of the original Breeze, Aspire has redesigned their MTL starter kit with a longer lasting 1000mAh internal battery, revamped refillable pod cartridge and adjustable airflow. Thus moving the Breeze 2 into the mouth to lung, restricted and direct lung inhale categories.

                          U-Tech coil technology achieves the most flavourful vapour from a pod system and the included 1.0Ω coil is perfect for nicotine salts use. A dark-tint replaceable pod means monitoring your juice levels couldn’t be easier.

                          The combination of a high performance coil system, ultra compact form factor and simplicity makes the Aspire Breeze 2 a great on-the-go device!

                          Purchase additional coils here: Aspire Breeze 2 Replacement Coil Pack

                          • All In One System
                            • Single Fire Button Operated
                              • Integrated 1000mAh Internal Battery
                                • Micro USB Charged
                                • 800mA Maximum Charge
                              • 3.0mL Tank Reservoir
                                • Top Filled
                                • Breeze U-Tech 0.6Ω Coil
                                • Breeze U-Tech 1.0Ω Coil
                                  • Used for Salt Based Nicotine E-Liquids
                                • Adjustable Airflow
                                  • Located When Removing Mouthpiece
                                  • Knurled Design
                                • Clear Tank Reservoir
                            • Direct Voltage Output
                              • Bases on Battery State
                            • Compact Profile
                              • 19mm by 35mm by 96mm
                              • Perfect for Travel and Commuting
                              • Easily Fits Within Shirt Pocket
                            • Multi Use Top Cap
                              • Acts as Drip Tip
                              • Access Coil
                              • Protective Cap
                            • LED Battery Life Indicator
                              • Blue/Orange
                                • 4.2V to 3.8V
                              • Blue
                                • 3.7V to 3.4V
                              • Orange
                                • 3.3V to 3.0V
                            • Aluminum Alloy Construction
                              • PEPG Tank Section
                            In The Box
                            1x Aspire Breeze 2
                            1x 1.0Ω Coil
                            1x 0.6Ω Coil

                            4x Extra O-rings
                            1x Silicone Seal
                            1x Micro USB Charging Cable
                            1x User Manual

                            More Details →

                            CUSTOMER REVIEWS

                            Based on 3 reviews Write a review

                            Vandy Vape Pulse BF / 80W // 8mL

                            $128.00

                            Or 4x interest free payments of $32.00 NZD

                            Brand Vandy Vape

                            After much anticipation the VandyVape x Tony B Pulse BF 80W Box Mod has hit The Vape Shop NZ stores!

                            Following the huge success of its unregulated predecessor, this 80W mod is sure to please squonk mod lovers. Updated with VandyVape’s proprietary Vandy Chip and also a larger 8mL squonk bottle, we have some good feelings about this device!

                            Available in an array of different colours, including four beautiful coloured resin styles and two sleek carbon fibre designs with magnetic doors, this will be sure to look good in anyone’s hand!

                            The powerful Vandy Chip offers high-efficiency and high-accuracy including overheating, overcurrent, short circuit, open circuit, overtime, and reverse polarity protection; and also features a low battery warning.

                            Compatible with both 18650 and 20700 batteries (sold separately).

                            Specifications

                            • Size: 54 x 25.9 x 82 mm
                            • Max wattage output: 80 watts
                            • Connection threading: 510

                            In The Box

                            • Vandy Vape Pulse BF 80W Box Mod
                            • 8 mL Squonk Bottle
                            • QC USB Cable
                            • Instructional Manual
                            • 18650 Battery Adapter
                            More Details →

                            CUSTOMER REVIEWS

                            Based on 4 reviews Write a review

                            VGOD Pro Mech 2 Kit / Elite RDA // 24mm

                            $168.00

                            Or 4x interest free payments of $42.00 NZD

                            Brand VGOD

                            The world's most popular mech tube is now available in New Zealand!

                            Bend tricks and chuck clouds with the VGOD Mech Pro 2 Kit. This kit is made for serious vapers! Featuring a copper chassis, CNC machined delrin comfort grips, and VGOD's own TriCon switch - the Mech Pro 2 offers the best in comfort, quality, and performance. 

                            This kit includes both the VGOD Mech Pro 2 tube and the VGOD Elite RDA.

                            VGOD Mech Tube

                            • Unique CNC machined removable Delrin comfort sleeves.
                            • TriCon switch comes with three independent pins increase surface contact with battery.
                            • Carbon fibre switch with built-in self-adjusting battery ring to lock battery in place.
                            • Comes with Elite RDA, 2mL juice well, dual post build deck.
                            • Portable case included for convenient carrying and storage.
                            • Dimension: 24 x 85.2mm
                            • Material: Billet Copper/Stainless Steel/Gold.
                            • Cell Type: Single high-drain 18650 cell (Not Included).
                            • Thread: 510 hybrid thread.

                            Elite RDA

                            • Height: 33mm
                            • Outside Diameter: 24mm
                            • Thread: 510 thread
                            • Juice Well: 9.25mm in depth
                            • Liquid Capacity: 2mL

                            In The Box

                            • 1x VGOD PRO Mech 2 Mod
                            • 1x VGOD Elite RDA
                            • 1x VGOD Carry Case
                            • 1x Manual
                            • 1x Accessories Pack
                            More Details →

                            CUSTOMER REVIEWS

                            Based on 1 review Write a review
                            Sold Out

                            Geekvape Blade 235W

                            $89.00

                            Or 4x interest free payments of $22.25 NZD

                            Brand Geekvape

                            This product is unavailable

                            Geekvape's greatest has arrived in New Zealand!

                            The Blade is a behemoth of a mod. Sporting two 21700, 20700 or 18650 batteries (not included) this device has what it takes to run big power all day. Capable of a whopping maximum output of 235 watts and constructed with aircraft grade PPS this is one of the beastliest mods on the market today.

                            With a design inspired by the classic works of Van Gough and all the features and functions you want including V/W mode (235w max), temperature control, bypass mode, and an illuminated fire button and LED display, this device is the perfect blend of classic styling and modern technology.

                            Specifications

                            Size: 93 x 52 x 38mm
                            Battery Type: 2x 18650(with adapter)/20700/21700 Battery (Not included)
                            Power Range: 5-235W
                            Material: Aircraft-grade PPS
                            Resistance Range: 0.05-3.0ohm
                            Working Modes: Power/TC/TCR/VPC/BYPASS
                            Thread: 510 thread

                            In The Box

                            1x Blade MOD
                            1x 18650 Battery Adapter
                            1x User Manual
                            1x USB Cable

                            More Details →

                            CUSTOMER REVIEWS

                            Based on 3 reviews Write a review

                            Uwell Nunchaku 80W Kit

                            $138.00

                            Or 4x interest free payments of $34.50 NZD

                            Brand Uwell

                            Enter the dragon with this innovative new design from Uwell - now available in New Zealand!

                            The Uwell Nunchaku lets you vape like a ninja with its sleek, discreet design that hides away with ease and packs a serious punch. This device is loaded with features including a proprietary chipset allowing for V/W mode (5w - 80w), temperature control mode (Ni, SS), and bypass mode. It also features a quartz glass tank and easy to change pull-plug coils. With the power of an 18650 external battery, the convenience of on-board USB charging, and a maximum direct output of 7 volts the Nunchaku is an absolute weapon making it a must have for any vape warrior.

                            Replacement coils available here.

                            Specifications

                            • Tank capacity: 5mL
                            • Material: stainless steel & quartz glass & copper & silicone
                            • Power range: 5-80W
                            • A new generation of e-cigarette control panel by Uwell independent R&D, makes the tube as safe as a box mod.
                            • Multiple work modes: power mode, TC mode (NI,SS), bypass mode.
                            • Replaceable 18650 battery, or charge over USB.
                            • Easy to replace plug-pull coils
                            In The Box
                            1× NUNCHAKU mod
                            1× NUNCHAKU atomizer
                            1× Extra quartz glass
                            1× 0.25Ω coil (installed)
                            1× 0.4Ω coil
                            1× Pack of replacement O-rings
                            • 1×Micro USB cable
                            • 1×User's manual
                            • 1×Drip tip cover (to cover the drip tip when it is not used)
                            More Details →

                            CUSTOMER REVIEWS

                            Based on 6 reviews Write a review

                            Suorin Air Kit

                            $44.00

                            Or 4x interest free payments of 25% on orders over $50

                            Brand Suorin

                            One of the first of its kind available in New Zealand, the Suorin Air is the ultimate gateway into the vaping world! Sleek, simple, and user friendly, the Suorin Air fits into your pocket, your bag, or even your wallet with ease - one of the most discreet devices on the market today. With a refillable cartridge system designed to utilise high strength salt-based nicotine juices, the Suorin Air delivers a satisfying hit without creating large plumes of vapour; perfect for a cheeky, low-key vape any time, anywhere.

                            Featuring a beautiful matte textured finish and compact design; automatic draw detection - no need for a fire button!; an LED battery life indicator; and a handy on/off switch, the Suorin Air is perfect for beginner vapers, or veterans looking for a covert all-day device!

                            • All in One System
                              • Draw Activated Firing
                            • Refillable Suorin Pod System
                              • 2ml Capacity
                                • 1.2 ohm Atomizer Resistance
                                • Proprietary Connection
                              • Plug and Play Connection
                                • Gold Plated Proprietary Connection
                                • Pod Acts as Tip
                              • 400 mAh Built In Battery
                                • LED Battery Life Indicator
                                • On and Off Switch
                                • USB Charging Port
                                In The Box

                                1x Sourin Air 
                                1x Sourin Air Refillable Cartridge 
                                User Manual
                                USB Charging Cable

                                More Details →

                                CUSTOMER REVIEWS

                                Based on 3 reviews Write a review

                                SMOK Stick X8 Kit // TFV8 X-Baby Tank

                                $64.00

                                Or 4x interest free payments of $16.00 NZD

                                Brand SMOK

                                A new take on an old classic, SMOK's X8 Stick has hit the ground running in NZ! Successor to the highly popular V8 Stick series, the X8 Stick features the same convenient 'all-in-one' button design, a powerful 3000mAh battery to last you through the day, and punches well above its weight in both flavour and cloud with the new TFV8 X-Baby Tank.

                                Sporting a sleek, new finish, the device also features a brand new top air-flow system to enhance flavour and minimise any potential leaking.
                                Combining a perfect blend of style, power, and portability - the SMOK X8 Stick is a great pick for beginner to intermediate vapers.
                                • 24.5mm Diameter
                                • 139mm Height
                                • Integrated 3000mAh Battery 
                                • Direct Voltage Output System 
                                • Operating Voltage Range: 3.4V - 4.2V 
                                • Single Button Operation 
                                • Intelligent Battery Life Indicator 
                                • 8 Second Cutoff Protection 
                                • Low Resistance Protection 
                                • Short circuit protection 
                                • Low Voltage Protection 
                                • Micro USB Charging Port - Passthrough Capability
                                • 510 Connection

                                SMOK TFV8 X-Baby Tank 

                                • 24.5mm Diameter
                                • 4mL Eliquid Capacity
                                • Stainless Steel Construction
                                • High-Grade Glass Reinforcement
                                • Convenient Top-Fill Design With Hinge Lock
                                • Dual Adjustable Top Airflow Control
                                • Heat-Resistant Delrin Ultra-Wide Drip Tip
                                • 0.25Ω M2 Dual Coil
                                • 0.13Ω X4 Quad Coil
                                • 510 Connection
                                In The Box
                                1x Stick V8 Mod
                                1x TFV8 Big Baby Beast Tank
                                1x 0.15Ω V8 Baby-M2 Dual Core
                                1x 0.25Ω V8 Baby-M2 Dual Core
                                1x Micro USB Cable
                                Spare Parts and Seals
                                User Manual
                                More Details →

                                CUSTOMER REVIEWS

                                Based on 4 reviews Write a review

                                Suorin Drop Kit

                                $44.50

                                Or 4x interest free payments of 25% on orders over $50

                                Brand Suorin

                                The Suorin Drop has just touched down in NZ! The Suorin Drop is a robust and versatile water-drop style portable device that features the convenient Refillable Suorin Drop Cartridge System that is perfect for Mouth-To-Lung vaping, and can utilise salt-based nicotine juices.

                                The Suorin Drop is an all-in-one system with an easy to grip silicone, or gloss finish, draw activated firing, a magnetic pod system that can hold up to 2mL of e-liquid, an atomiser resistance of 1.3 to 1.4Ω and a maximum of 13W output. A 310mAh built in battery powers the device and an LED battery life indicator indicates its battery life.

                                Simple and convenient, the Suorin Drop is perfect for users looking for a sleek, discrete, all-day vaping device!

                                • 49mm by 12mm by 73mm
                                • All in One System
                                  • Draw Activated Firing
                                  • 13W Maximum Output
                                • Refillable Suorin Pod System
                                  • 2mL Capacity
                                    • 1.3 to 1.4Ω Atomiser Resistance
                                    • Proprietary Connection
                                  • Plug and Play Connection
                                    • Gold Plated Proprietary Connection
                                    • Pod Acts as Tip
                                  • 310 mAh Built In Battery
                                    • LED Battery Life Indicator
                                      • Located Under the Pod
                                    • USB Charging Port
                                  In The Box

                                  1x Sourin Drop Ultra Portable System
                                  1x Sourin Drop Atomiser
                                  User Manual
                                  USB Charging Cable

                                  More Details →

                                  CUSTOMER REVIEWS

                                  Based on 4 reviews Write a review
                                  Sold Out

                                  Aspire Breeze AIO Kit

                                  $42.00

                                  Or 4x interest free payments of 25% on orders over $50

                                  Brand Aspire

                                  This product is unavailable

                                  New Zealand's latest, greatest all-in-one (AIO) device has arrived!

                                  Give yourself the perfect entry into the vaping world with this sleek, convenient, and easy to use device. The Aspire Breeze utilises a compact and ergonomic design to fit into the palm or pocket with ease. This device also features a hands-free vacuum activated firing system, meaning you don't need to fiddle with a fire button - just grip it and rip it!

                                  With two coil options available (0.6Ω and 1.2Ω) available here, and four different colour ways, this device has the versatility to see you breeze through any situation.

                                  Specifications
                                  Dimensions: 93mm x 33mm x 18mm
                                  Tank capacity: 2ml

                                  Battery capacity: 650mah

                                  In The Box

                                  1 x Aspire Breeze
                                  1x 0.6Ω Coil
                                  1x 1.2Ω Coil
                                  1x USB Charging cable
                                  1x Replacement Seal Kit
                                  1x Warranty Card

                                  More Details →

                                  CUSTOMER REVIEWS

                                  Based on 1 review Write a review

                                  Vandy Vape Pulse BF Squonk Kit // 8ml

                                  $108.00

                                  Or 4x interest free payments of $27.00 NZD

                                  Brand Vandy Vape

                                  The Pulse Bottom Feed Squonk Box Kit by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

                                  • Locking power switch to help avoid accidental firing when not in use
                                  • Spring loaded 510 pin to accept many different length 510 pins of various designs
                                  • 8mL food grade soft squeeze silicone bottle
                                  • Copper contacts
                                  • Replaceable front and back panels
                                  • Manual Battery Disconnect
                                  • Requires a high amp 18650 or 20700 battery purchase here: Batteries
                                  • 8.0m food grade silicone bottle for squonking

                                  Retaining similar aesthetics from the original with a simple yet elegant appeal, the latest RDA in NZ from Vandy Vape, the Pulse 24 measures 24.4mm in diameter, innovative airflow style returns with side-mounted dual 3.5mm airslots that feeds into each pair of airflow tubes. The result is a concentrated and direct airway path to the deck with quad airflow tubes and acting as a leak resistant feature due to the angled orientation.

                                  The Pulse 24 BF integrates a quad terminal postless design, large terminal openings set into the deck and tightened via side-secured Phillips screws. The deck and chamber accommodates a wide range of large coil structures and a large liquid well. The well is cleverly designed for an efficient squonk-ready set-up with the included bottom-feeding 510 pin that feeds directly into the two sides of the juice well.

                                  In The Box
                                  1x Pulse BF Squonk Box Mod
                                  1x Pulse 24 BF RDA
                                  1x 16mm Drip Tip
                                  1 x 8ml Squonk Bottle
                                  1x 18650 Battery Adaptor
                                  2x Accessory Bags
                                  1x User Manual

                                    More Details →

                                    CUSTOMER REVIEWS

                                    Based on 1 review Write a review
                                    Sold Out

                                    Geekvape GBOX Squonk Kit / Radar RDA // 200w

                                    $129.00

                                    Or 4x interest free payments of $32.25 NZD

                                    Brand Geekvape

                                    This product is unavailable

                                    The GBOX bottom feed squonk mod by Geekvape is the latest regulated dual 18650 to hit NZ shores. With 200w maximum output it's designed to be both powerful and reliable, paired with the 8ml squonk bottle and the Radar bottom feed RDA; a brand new rebuildable with a 5ml juice well and unique building posts, the kit delivers ease, convenience and flavour unmatched by tank atomisers

                                    The GBOX is equipped with the AS chipset that is capable of up to 200W and a multitude of functionality. The GBOX has a full temperature control suite, VPC support, and a bypass mode. The GBOX is powered by dual 18650 batteries that are housed through a bottom locking latch door with the 8ml bottom feed bottle. The GBOX can be charged through the USB port up to 2A and utilises the chips smart charging management. The enlarged OLED display is neatly shown on a vertical menu with vape stats including resistance, amps, voltage, puff counter, and battery life.

                                    Along with the GBOX is the Radar bottom feed squonk RDA; a 24mm rebuildable atomiser with a unique dual staggered directional building post. Each posts on the Radar RDA features two terminals that are measured at 3mm in diameter and the coils are held by top mounted Allen screws.

                                    The Radar RDA has a 5mm deep juice well, perfect for dripping or squonking your favourite e-liquid. Airflow enters the Radar through two dual slotted air slots, one measuring at 9.5mm by 2mm, the other measuring at 3mm by 1mm. A 10mm wide bore 810 delrin drip tip comes pre-installed on the Radar but can be switched off with the 10mm 510 delrin drip tip for user preference. With an amazing output and a powerful chipset, the GBOX 200W Kit by Geekvape offers bottom feed users versatility through functionality. 

                                    • 5 to 200W Output
                                      • GeekVape AS Chip
                                        • Seven Total Output Modes
                                      • 0.05 to 3.0 ohm Atomizer Resistance Range
                                      • 0.1 to 8 Voltage Range
                                      • 0.96" Display Screen
                                    • Temperature Control Suite
                                      • Ni200 Nickel Support
                                      • Titanium Support
                                      • SS316 Support
                                      • Kanthal Support
                                      • POWER Support
                                      • VPC Support
                                      • Bypass Mode
                                    • Sliding and Locking Bottom Battery Access Door
                                      • Accepts Dual 18650 Battery (sold separately)
                                    • Enlarged OLED Display
                                      • Amp Range
                                      • Output Power
                                      • Atomizer Resistance
                                      • Battery Life Indicator
                                      • Puff Counter
                                      • Neatly Displayed
                                    • Zinc and Aluminum Materials
                                    • 8ml Squonk Bottle Juice Capacity
                                      • Bottom Feed Bottle Can Be Removed From the Bottom Battery Access Door
                                    • Micro USB Port
                                      • Charges upto 2A
                                    • Spring Loaded Gold Plated 510 Connection
                                      • Hexagon Shaped
                                    • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating

                                     

                                    Radar RDA

                                  • 24mm Diameter
                                  • Additional Cooling Wide Bore Top Cap
                                    • Dual Airslots per Side
                                      • 3mm by 1mm per Airslot
                                  • Staggered Directional Post Build Deck
                                    • Two Terminal Per Post
                                      • 3mm Diameter Terminals
                                      • Top Mounted Allan Screws
                                    • 5mm Deep Juice Well
                                    • Double O-Ring Secured
                                    • PEEK Insulator
                                  • Dual Side Airslots
                                    • 9.5mm by 2mm Each
                                    • Fully Closeable
                                  • 10mm Wide Bore 810 Delrin Drip Tip
                                  • 10mm Bore Delrin 510 Delrin Drip Tip
                                  •  

                                    In The Box
                                    1x GBOX Mod
                                    1x Radar 24mm RDA
                                    1x Spare Squonk Bottle
                                    1x GeekVape Allen Key
                                    1x 810 Delrin Drip Tip

                                    1x 510 Delrin Drip Tip
                                    Spare Parts Pack
                                    1x USB Cable
                                    User Manual

                                    More Details →

                                    SMOK Procolor Mod // 225W

                                    $99.00

                                    Or 4x interest free payments of $24.75 NZD

                                    Brand SMOK

                                    The SMOK ProColor 225W is the latest device from SMOK to hit NZ and follows up two of the best selling vape kits and mods in New Zealand - the Alien 220W and T-PRIV 220W.

                                    The Procolor features 225W of power, three output modes and upgradeable firmware. Front OLED screen displays essential information to the user and LED lights on device make for a unique user customisation. 12 light colour options - cyan, white, rainbow, red, green, blue, yellow, magenta, pink, violet, orange and RGB, can be programmed for different styles and lengths of time. A comprehensive temperature control suite packs in adjustable TCR as well as preheat function, making the ProColor a complete and versatile platform.

                                    Adjustments are made via two buttons and the squeeze to fire, firing button.

                                    • 6 to 225W Power Output
                                      • 0.5 to 9.0V
                                      • 0.1 to 3.0Ω Atomiser Resistance Range
                                      • Three Setting Output Mode
                                        • Hard
                                        • Normal
                                        • Soft
                                      • Firmware Upgradeable
                                    • Temperature Control Output
                                      • Ni200 Nickel Support
                                      • Titanium Support
                                      • Stainless Steel Support
                                      • Adjustable Initial Resistance
                                      • Adjustable TCR
                                      • Preheat Capability
                                      • 200 to 600 degree Fahrenheit Output Range
                                      • 0.06 to 3.0Ω Atomiser Resistance Range
                                    • Front Mounted OLED Screen
                                      • Vibrant Display Resolution
                                      • Icon Based Display Matrix
                                        • Highly Visible
                                        • Comprehensive Menu Settings and Adjustment
                                        • Full Display
                                        • Dual Battery Life Indicator
                                    • Dual Adjustment Buttons
                                    • LED Lights On Device
                                      • 12 Colors
                                        • Cyan
                                        • White
                                        • Rainbow
                                        • Red
                                        • Green
                                        • Blue
                                        • Yellow
                                        • Magenta
                                        • RGB
                                        • Orange
                                        • Pink
                                        • Purple
                                      • Different Light Display Styles
                                        • Normal
                                        • Fade
                                        • Flash
                                      • Various Allowed Time
                                        • Always On
                                        • Screen On
                                        • While Vaping
                                        • Off
                                    • Innovative and Ergonomic Firing Mechanism
                                      • Comfortable and Easy to Use
                                      • Squeeze to Fire Operation
                                    • Hinge and Lock Battery Access Door
                                      • Accepts Two High Amperage 18650 Battery Powered
                                      • Spring Loaded Internal Contacts
                                    • Zinc Alloy Chassis
                                    • Stainless Steel 510 Threading
                                      • Gold Plated 510 Contact

                                    ProColor Dimensions:

                                    • 85mm by 46mm by 29.5mm
                                    In The Box
                                    1x SMOK ProColor 225W Mod

                                    1x USB Charging Cable
                                    User Manual

                                    More Details →

                                    CUSTOMER REVIEWS

                                    Based on 1 review Write a review

                                    Vandy Vape Pulse BF Squonk Mod // 8ml

                                    $64.00

                                    Or 4x interest free payments of $16.00 NZD

                                    Brand Vandy Vape

                                    The Pulse Bottom Feed Squonk Box Mod by Vandy Vape has touched down in NZ! Taking a single 18650 or 20700 battery the Pulse is the first of its type in being completely affordable without sacrificing quality in its design. The device has a simple aesthetic with a side magnetic door that reveals the internal battery and squonk bottle compartment. Inside includes a manual disconnect for disabling the device while not in use so it may be pocketed without worry.

                                    • Locking power switch to help avoid accidental firing when not in use
                                    • Spring loaded 510 pin to accept many different length 510 pins of various designs
                                    • 8mL food grade soft squeeze silicone bottle
                                    • Copper contacts
                                    • Replaceable front and back panels
                                    • Manual Battery Disconnect
                                    • Requires a high amp 18650 or 20700 battery purchase here: Batteries
                                    • 8.0m food grade silicone bottle for squonking
                                    In The Box
                                    1x Pulse BF Squonk Box Mod
                                    1x 18650 Battery Adaptor
                                    1x User Manual
                                      More Details →

                                      dotMod dotSquonk

                                      $148.00

                                      Or 4x interest free payments of $37.00 NZD

                                      Brand dotMod

                                      dotSquonk, the squonk you've been looking for, now available in NZ and delivered to your door overnight!

                                      The dotSquonk that you can afford. With so many squonk boxes on the market, DotMod wanted to do the sqounk right. And part of being right is being in a price range that everyday advanced users can afford. Coming in at just under $150 before shipping, you can be bottom-feeding by Christmas in style!

                                      Two ways to play. Refill your bottle by removing it or if you're in a hurry you can top fill using your unicorn style bottle, through your dotRDA24 squonk pin. You decide.

                                      The perfect marriage. the dotSquonk brings out added features when utilized with the dotRDA24.  And with an upgraded center 510 pin (which is also removable) made of 24k gold plated brass, this is a mechanical mod with even better pull than our tube mods.   

                                      Why it's awesome

                                      1. Might just be best squonk in town.
                                      2. Customise your dotSquonk's look with 2 doors. 
                                      3. Pairs perfectly with the dotRDA24.
                                      4. Use 20700 or 18650 batteries.
                                      5. Top-fill through the dotRDA24 for on the go. 
                                      6. Beveled edges for superior feel in your hand.

                                      In The Box

                                      1x dotSquonk 
                                      2x Removable doors
                                      1x 18650 Battery sleeve 
                                      1x Juice Bottle (silicon with ultem top)
                                      1x 510 connector o-ring
                                      1x Brass 24k gold plated 510 squonk pin 
                                      1x Certificate of authenticity 

                                        Please note:

                                        This product is for advanced users only.

                                        Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1Ω to 3.0Ω. Do not build below 0.1Ω resistance. Use at your own risk and take appropriate precautions when using this device.

                                        More Details →

                                        CUSTOMER REVIEWS

                                        No reviews yet Write a review
                                        Sold Out

                                        SMOK Procolor Kit / Big Baby Beast Tank // 225W

                                        $138.00

                                        Or 4x interest free payments of $34.50 NZD

                                        Brand SMOK

                                        This product is unavailable

                                        The SMOK ProColor 225W with TFV8 Big Baby Beast Kit is the latest device from SMOK to hit NZ and follows up two of the best selling vape kits and mods in New Zealand - the Alien 220W and T-PRIV 220W.

                                        The Procolor features 225W of power, three output modes and upgradeable firmware. Front OLED screen displays essential information to the user and LED lights on device make for a unique user customisation. 12 light colour options - cyan, white, rainbow, red, green, blue, yellow, magenta, pink, violet, orange and RGB, can be programmed for different styles and lengths of time. A comprehensive temperature control suite that packs in adjustable TCR as well as preheat function, making the ProColor a complete and versatile platform.

                                        Adjustments are made via two buttons and the squeeze to fire, firing button. Included with the SMOK ProColor 225W Kit is the SMOK TFV8 Big Baby Beast tank which combines the best elements from SMOK - high performance and a small form factor, with the affordable coils from the Baby coil family. 

                                        ProColor 225W

                                        • 6 to 225W Power Output
                                          • 0.5 to 9.0V
                                          • 0.1 to 3.0Ω Atomiser Resistance Range
                                          • Three Setting Output Mode
                                            • Hard
                                            • Normal
                                            • Soft
                                          • Firmware Upgradeable
                                        • Temperature Control Output
                                          • Ni200 Nickel Support
                                          • Titanium Support
                                          • Stainless Steel Support
                                          • Adjustable Initial Resistance
                                          • Adjustable TCR
                                          • Preheat Capability
                                          • 200 to 600 degree Fahrenheit Output Range
                                          • 0.06 to 3.0Ω Atomiser Resistance Range
                                        • Front Mounted OLED Screen
                                          • Vibrant Display Resolution
                                          • Icon Based Display Matrix
                                            • Highly Visible
                                            • Comprehensive Menu Settings and Adjustment
                                            • Full Display
                                            • Dual Battery Life Indicator
                                        • Dual Adjustment Buttons
                                        • LED Lights On Device
                                          • 12 Colors
                                            • Cyan
                                            • White
                                            • Rainbow
                                            • Red
                                            • Green
                                            • Blue
                                            • Yellow
                                            • Magenta
                                            • RGB
                                            • Orange
                                            • Pink
                                            • Purple
                                          • Different Light Display Styles
                                            • Normal
                                            • Fade
                                            • Flash
                                          • Various Allowed Time
                                            • Always On
                                            • Screen On
                                            • While Vaping
                                            • Off
                                        • Innovative and Ergonomic Firing Mechanism
                                          • Comfortable and Easy to Use
                                          • Squeeze to Fire Operation
                                        • Hinge and Lock Battery Access Door
                                          • Accepts Two High Amperage 18650 Battery Powered
                                            • Sold Separately
                                          • Spring Loaded Internal Contacts
                                        • Zinc Alloy Chassis
                                        • Stainless Steel 510 Threading
                                          • Gold Plated 510 Contact


                                        ProColor Dimensions:

                                        • 85mm by 46mm by 29.5mm


                                        TFV8 Big Baby Beast

                                        • 24.5mm Diameter
                                        • Hinge and Lock Top Fill System
                                          • Swivels Open and Shut
                                          • Fill Port
                                        • 5.0ml Max Capacity
                                        • SMOK Baby Turbo Coil Family
                                          • V8 Baby T8 Coil Head
                                            • 0.15Ω
                                            • Quadruple Coil
                                            • 50 to 100W
                                            • 60 to 80W Recommended Range
                                          • V8 Baby Q2 Coil Head
                                            • 0.4Ω
                                            • Dual Coil
                                            • 40 to 80W
                                            • 55 to 65W Recommended Range
                                        • Dual Adjustable 15mm by 2mm Airslots
                                        • 8.5mm Delrin Drip Tip
                                        • Stainless Steel and Glass Construction


                                        In The Box

                                        1x SMOK ProColor 225W Mod
                                        1x SMOK TFV8 Big Baby Beast Tank
                                        1x V8 Baby T8 Coil Head
                                        1x V8 Baby Q2 Coil Head
                                        2x Vape Bands

                                        1x USB Charging Cable
                                        Replacement Parts and Glass
                                        User Manual

                                        More Details →

                                        CUSTOMER REVIEWS

                                        Based on 1 review Write a review

                                        Vaporesso Revenger Mod // 220W

                                        $94.00

                                        Or 4x interest free payments of $23.50 NZD

                                        Brand Vaporesso

                                        Vaporesso introduces their new flagship platform, the Revenger 220W Kit and it's just be delivered to us in NZ! Utilising the latest OMNI Board 2.0 chipset, the Revenger has a 5 to 220W output range, a 0.05 to 5.0Ω atomiser resistance range, and several output modes, two of which include: Customized Curve of Wattage (CCW) and Customized Curve of Temperature (CCT), giving the device much functional versatility.

                                        The Revenger 220W TC device is powered by two 18650 batteries (find them here: Batteries) which can be accessed via the magnetised battery door. A 0.96 inch OLED screen displays essential information to the user such as: wattage/temperature, atomiser resistance, individual battery life display, and also has a Real Time Clock (RTC) display.

                                        The screen itself blends in to the panel, giving the device a unique and classy look. Along with the aluminum alloy chassis material, Vaporesso introduces an In-Mould Labeling (IML) Injection Coating, which is environmentally friendly and allows for greater quality graphics than traditional decorating methods. The Revenger can be charged via USB and has the capability of a 2.5A quick charge, alongside a balancing charge system and USB input protection.

                                        • 5 to 220W Output
                                          • OMNI Board 2.0
                                            • Six Total Output Modes
                                          • 0.05 to 5.0Ω Atomizer Resistance Range
                                          • 0 to 8.5V Voltage Range
                                          • Smart VW
                                            • Automatically Recommend Ideal Output
                                            • Can Easily Adjust
                                          • Customized Curve of Wattage (CCW)
                                            • Customize Wattage Output By Second Increments
                                            • Customize Ramp Up by 0.5 Second Increments
                                          • Bypass Mode
                                          • Firmware Upgradeable
                                        • Temperature Control Suite
                                          • Ni200 Nickel Support
                                          • Titanium Support
                                          • SS316 Support
                                          • Customized Curve of Temperature (CCT)
                                            • Customize Temperature Output Over Time
                                          • TCR Mode
                                          • 200 to 600 Degrees Fahrenheit
                                          • Atomizer Lock
                                        • Magnetized Battery Bay Access
                                          • Dual 18650 Battery Powered
                                        • Sleek and Beautiful Chassis Design
                                          • Futuristic Styling
                                        • Four Button Control
                                          • Enlarged Firing Button
                                          • Angular Adjustment Buttons
                                          • Mode Button
                                        • 0.96 Inch OLED Display
                                          • Temperature Mode and Output
                                          • Output Power
                                          • Atomizer Resistance
                                          • Individual Battery Life Indicator
                                            • Remaining Charging Time (RCT)
                                          • Puff Counter
                                          • Real Time Clock (RTC) Setting
                                          • Screen Blends in to Panel
                                        • 2.5A Quick Charge System
                                          • Remaining Charging Time
                                          • Equalizing Charge System
                                          • USB Input Protection
                                        • Micro USB Charging Port
                                        • In-Mould Labeling (IML) Injection Coating and Aluminum Alloy Chassis
                                        • Spring Loaded Gold Plated 510 Connection
                                        • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating/Anti Loaded/Timeout Protection


                                        Dimensions

                                        • 45mm by 89mm by 28mm


                                        In The Box

                                        1x Vaporesso Revenger 220W Mod
                                        1x Micro USB Charging Cable
                                        User Manual
                                        More Details →

                                        CUSTOMER REVIEWS

                                        Based on 2 reviews Write a review

                                        Vaporesso Revenger Kit / NRG Tank // 220W

                                        $117.00

                                        Or 4x interest free payments of $29.25 NZD

                                        Brand Vaporesso

                                        Vaporesso introduces their new flagship platform, the Revenger 220W Kit and it's touched down in NZ! Utilising the NRG sub-ohm tank and latest OMNI Board 2.0 chipset, the Revenger has a 5 to 220W output range, a 0.05-5.0Ω atomiser resistance range, and several output modes, two of which include: Customized Curve of Wattage (CCW) and Customized Curve of Temperature (CCT), giving the device much functional versatility.

                                        The Revenger 220W TC device is powered by two 18650 batteries (find them here: Batteries) which can be accessed via the magnetised battery door. A 0.96 inch OLED screen displays essential information to the user such as: wattage/temperature, atomiser resistance, individual battery life display, and also has a Real Time Clock (RTC) display.

                                        The screen itself blends in to the panel, giving the device a unique and classy look. Along with the aluminum alloy chassis material, Vaporesso introduces an In-Mould Labeling (IML) Injection Coating, which is environmentally friendly and allows for greater quality graphics than traditional decorating methods. The Revenger can be charged via USB and has the capability of a 2.5A quick charge, alongside a balancing charge system and USB input protection.

                                        The new NRG sub-ohm tank that is slide to fill and capable of holding up to 5ml of your favorite e-liquid. The NRG utilises the GT Coil Family and the kit includes a 0.15Ω GT 4 coil head and a 0.15Ω GT 8 coil head. The GT 4 coil head is a dual vertical coil, rated for 30 to 70W while the GT 8 coil head is a quadruple vertical coil, rated for 50 to 110W.

                                        The NRG has dual adjustable bottom airflow that is fully closeable, an extra heating insulation layer, and a proprietary 14mm bore delrin mesh drip tip that prevents spit back. Vaporesso's Revenger 220W TC Starter Kit combines the OMNI Board 2.0, a futuristic chassis design, and their NRG sub-ohm tank into one highly affordable and versatile kit on the market in New Zealand

                                        Purchase additional coils here - Vaporesso NRG GT  Replacement Coil Pack

                                        • 5 to 220W Output
                                          • OMNI Board 2.0
                                            • Six Total Output Modes
                                          • 0.05 to 5.0Ω Atomizer Resistance Range
                                          • 0 to 8.5V Voltage Range
                                          • Smart VW
                                            • Automatically Recommend Ideal Output
                                            • Can Easily Adjust
                                          • Customized Curve of Wattage (CCW)
                                            • Customize Wattage Output By Second Increments
                                            • Customize Ramp Up by 0.5 Second Increments
                                          • Bypass Mode
                                          • Firmware Upgradeable
                                        • Temperature Control Suite
                                          • Ni200 Nickel Support
                                          • Titanium Support
                                          • SS316 Support
                                          • Customized Curve of Temperature (CCT)
                                            • Customize Temperature Output Over Time
                                          • TCR Mode
                                          • 200 to 600 Degrees Fahrenheit
                                          • Atomizer Lock
                                        • Magnetized Battery Bay Access
                                          • Dual 18650 Battery Powered
                                        • Sleek and Beautiful Chassis Design
                                          • Futuristic Styling
                                        • Four Button Control
                                          • Enlarged Firing Button
                                          • Angular Adjustment Buttons
                                          • Mode Button
                                        • 0.96 Inch OLED Display
                                          • Temperature Mode and Output
                                          • Output Power
                                          • Atomizer Resistance
                                          • Individual Battery Life Indicator
                                            • Remaining Charging Time (RCT)
                                          • Puff Counter
                                          • Real Time Clock (RTC) Setting
                                          • Screen Blends in to Panel
                                        • 2.5A Quick Charge System
                                          • Remaining Charging Time
                                          • Equalizing Charge System
                                          • USB Input Protection
                                        • Micro USB Charging Port
                                        • In-Mould Labeling (IML) Injection Coating and Aluminum Alloy Chassis
                                        • Spring Loaded Gold Plated 510 Connection
                                        • Low Voltage/Current/Output Short Circuit/Load/Low Resistance/Overheating/Anti Loaded/Timeout Protection

                                        Dimensions

                                        • 45mm by 89mm by 28mm


                                        Vaporesso NRG Sub-Ohm Tank

                                        • 26.5mm Diameter
                                        • Slide To Fill Top Fill Design
                                          • Large Fill Port
                                          • 5ml Maximum Capacity
                                        • GT Coil Family
                                          • GT 4
                                            • 0.15Ω
                                            • Dual Vertical Coil
                                            • 30 to 70W
                                            • 45 to 65W Recommended Range
                                          • GT 8
                                            • 0.15Ω
                                            • Quadruple Vertical Coil
                                            • 50 to 110W
                                            • 60 to 80W Recommended Range
                                          • Organic Cotton
                                        • Dual Adjustable Bottom Airflow
                                          • 13mm by 2.5mm Each Airslot
                                          • Fully Closeable
                                        • Proprietary 14mm Bore Delrin Mesh Drip Tip
                                          • Prevents Spit Back
                                        • Heating Insulation Layer
                                        • 510 Drip Tip Adapter

                                        In The Box
                                        1x Vaporesso Revenger 220W Mod
                                        1x Vaporesso NRG Sub-Ohm Tank
                                        1x 0.15Ω GT 4 Coil
                                        1x 0.15Ω GT 8 Coil
                                        1x Proprietary 14mm Bore Delrin Mesh Drip Tip
                                        1x 510 Drip Tip Adapter
                                        1x Micro USB Charging Cable
                                        Spare Glass and O-Rings
                                        User Manual
                                        More Details →

                                        CUSTOMER REVIEWS

                                        Based on 12 reviews Write a review
                                        Sold Out

                                        CKS x Asmodus Stride // 80W

                                        $138.00

                                        Or 4x interest free payments of $34.50 NZD

                                        Brand Asmodus

                                        This product is unavailable

                                        CKS have teamed up with legendary asMODus to bring you one of the most beautiful regulated single 18650 mods on the market. Complete with a marble finish with classy gold trimmings, it’s sure to catch the eye of passersby.

                                        Featuring a vivid colour display on it’s spacious OLED screen, it makes this premium box mod a pleasure to navigate. With an output power range of 5.0 - 80.0 watts, it’s one of the best middle-watt devices on the market. Inside is one of asMODus’ renowned regulated chips giving this beauty astonishing battery efficiency.

                                        The Stride requires one 18650 battery. We recommend the Samsung 25R or Samsung 30Q for this device.

                                        • Output Power Range: 5 - 80 Watts
                                        • Continuous Output Current: 15 - 20 Amps
                                        • Atomiser Resistance Range (power modes): 0.1 - 3Ω
                                        • Atomiser Resistance Range (temperature modes): 0.1 - 0.5Ω
                                        • Battery Input Voltage Range: 3.3 - 4.2 Volts
                                        • Conversion Efficiency: 93%
                                        • Bright Screen Current: 0.3mA
                                        • Shutdown Current: 0.3mA
                                        • Overtime
                                        • Screen Set
                                        • Mode Set
                                        • Puff Counter
                                        • Temperature Control
                                        • Font Colour Control
                                        • Background Colour Control

                                        In The Box
                                        1x CKS x Asmodus Stride 80W Mod
                                        Instruction Manual

                                        More Details →
                                        Sold Out

                                        Asmodus Minikin V2 Touchscreen // 180W

                                        $165.00

                                        Or 4x interest free payments of $41.25 NZD

                                        Brand Asmodus

                                        This product is unavailable

                                        The asMODus Minikin V2 has arrived in NZ at The Vape Shop. This dual 18650 mod is a sleek powerhouse with a maximum power output of 180 watts. Featuring a state of the art touchscreen for all menu functions because let’s be honest, buttons are so 2016.

                                        With the renowned GX-180-HT/UT chip inside, this mod is a reliable workhorse with amazing battery efficiency so you can keep vaping all day! asMODus redesigned the chassis from the original Minikin resulting in the V2 being far more ergonomic to hold and use. The battery door has also been refreshed, adding magnets to keep it in place.

                                        Simply swipe down on the touch screen to unlock the device and see the vivid OLED display. The screen features a variety of handy things including individual battery charge indicators, a puff counter as well as a puff timer.

                                        Coming in a range of different finishes and colours, there’s sure to be a Minikin 2 to suit your style. We will not be held responsible for the sheer amount of compliments you get when people see this masterpiece of a mod!

                                        • Touchscreen Type: Capacitive
                                        • Wattage Range: 5 - 180W
                                        • Wattage Range In Temperature Control Mode: 5 - 120W
                                        • Atomiser Resistance Range: 0.1 - 2.5Ω
                                        • Maximum Output Voltage: 7.5V
                                        • Peak Output Current: 45A
                                        • Temperature Control Range: 100°C - 300°C
                                        • Charging Parameters: DC 5V/1A
                                        • Upgradeable System

                                          In The Box
                                          1x Asmodus Minikin V2 Touchscreen 180W Mod
                                          Instruction Manual

                                          More Details →

                                          CUSTOMER REVIEWS

                                          Based on 2 reviews Write a review
                                          Sold Out

                                          Asmodus Minikin Boost // 155W

                                          $139.00

                                          Or 4x interest free payments of $34.75 NZD

                                          Brand Asmodus

                                          This product is unavailable

                                          The Asmodus Minikin Boost 155W has touched down in NZ! This dual battery device is sure to catch the eye of onlookers. Featuring a rubberised matte finish with paint splatter, it’s a sleek, stylish vaping machine! Complete with the all usual temperature control features you’d come to expect, this device is a solid all rounder that will serve you very well.

                                          Featuring Amodus’ ground breaking new feature “Curve”, you can pinpoint exactly how you’d like your vape to work. With Curve you can select five different wattages to work over 10 seconds to replicate temperature control but to your own personal specification. Curve ensures you can tailor your ramp up time so whether you’re using regular kanthal wire or large mass staggered stapled fused claptons, you can get plooms of vapour as quickly as you desire!

                                          • Power Mode Output Range: 5 Watts - 155 Watts
                                          • Temperature Control Mode Output Range: 5 Watts - 120 Watts
                                          • Temperature Range: 100°C - 300°C
                                          • Atomiser Resistance Range: 0.1Ω - 2.5Ω
                                          • Firing Modes: Power, Temp Ni200, Temp SS316, Temp SS317, Temp SS304, Temp Ti, TCR, TFR, and Curve
                                          • Maximum Output Voltage: 7.5 Volts
                                          • Maximum Output Current: 3.5 Amps
                                          • Micro USB Port For Future Firmware Updates And Charging

                                          In The Box
                                          1x Asmodus Minikin Boost 155w Mod
                                          Instruction Manual

                                          More Details →
                                          Sold Out

                                          Wismec Sinuous P80 Mod // 80W

                                          $67.00

                                          Or 4x interest free payments of $16.75 NZD

                                          Brand Wismec

                                          This product is unavailable

                                          The latest flagship device from Wismec in collaboration with Sinuous Designs, the SINUOUS P80 has landed in NZ. An extremely well thought out design with a centered 510 connector, side OLED display and powered by single 18650 cell reaching an impressive 80W output. Unique features include 2A quick charge, preheat and LED light with three changeable colours.

                                          • Wattage Output Range: 1-80W
                                          • Minimum Atomiser Resistance: 0.05Ω
                                          • Indicator Light With Three Changeable Colours
                                          • Ni200, Titanium, 316 Stainless Steel Temperature Control Compatibility
                                          • TCR Adjustments
                                          • Ergonomic Contour
                                          • Stealth Firing Bar - Squeeze to Fire
                                          • LED Battery Light Indicator
                                          • Intuitive 0.96 Inch OLED Display
                                          • Slide-to-Open Hinged Battery Door
                                          • Dual Circuit Protection
                                          • Reverse Polarity Protection
                                          • Micro USB Port With 2A Fast Charging
                                          • Centered 510 Connection - Fits Up To 25mm Atomisers
                                            In The Box
                                            1x Sinuous P80 Mod

                                            1x USB Cable
                                            Instructional Manual

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 1 review Write a review

                                            Wismec Sinuous P80 Kit // 80W

                                            $94.00

                                            Or 4x interest free payments of $23.50 NZD

                                            Brand Wismec

                                            The latest flagship device from Wismec in collaboration with Sinuous Designs, the SINUOUS P80 has landed in New Zealand. An extremely well thought out design with a centered 510 connector, side OLED display and powered by single 18650 cell reaching an impressive 80W output.

                                            Unique features include 2A quick charge, preheat and LED light with three changeable colours, an intuitive slide-top fill solution, creative childproof lock system. The Elabo Mini Sub-Ohm Tank with powerful WS coil perfectly pairs with SINUOUS P80. 

                                            Purchase additional coils here: Wismec WS01 Replacement Coil Pack

                                            Wismec Sinuous P80

                                            • Wattage Output Range: 1-80W
                                            • Minimum Atomiser Resistance: 0.05Ω
                                            • Indicator Light With Three Changeable Colours
                                            • Ni200, Titanium, 316 Stainless Steel Temperature Control Compatibility
                                            • TCR Adjustments
                                            • Ergonomic Contour
                                            • Stealth Firing Bar - Squeeze to Fire
                                            • LED Battery Light Indicator
                                            • Intuitive 0.96 Inch OLED Display
                                            • Slide-to-Open Hinged Battery Door
                                            • Dual Circuit Protection
                                            • Reverse Polarity Protection
                                            • Micro USB Port With 2A Fast Charging
                                            • Centered 510 Connection - Fits Up To 25mm Atomisers

                                            Wismec Elabo Mini Sub-Ohm Tank

                                            • 22mm Diameter
                                            • 2mL Maximum Juice Capacity
                                            • High Quality Stainless Steel Construction
                                            • Pyrex Glass Reinforcement
                                            • 0.2Ω WS01 Triple Head - rated 40-80W
                                            • Convenient Sliding Top-Fill Method 
                                            • Childproof Lock System
                                            • Dual Massive Bottom Airflow Control
                                            • Wide bore Drip Tip
                                            • Detachable Structure
                                            • 510 Connection

                                            In The Box

                                            1x Sinuous P80 Mod
                                            1x Elabo Mini Sub-Ohm Tank
                                            2x 0.2Ω Triple Coil Head
                                            Instructional Manual
                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 4 reviews Write a review

                                            dotMod Tiffany Blue Petri Lite - Limited Edition

                                            $188.00

                                            Or 4x interest free payments of $47.00 NZD

                                            Brand dotMod

                                            • Hard Hitting Naval Brass
                                            • Anodised Aluminum Composite Button Design
                                            • Precision Anodised Aluminum Tube And Body  
                                            • 24K Gold Plated Threading And Accents
                                            • 24K Gold Plated Copper Contacts
                                            • Hybrid Connection
                                            • Fully Masked Internals (no cleaning, ever) 
                                            • Precision Micro-Engravings
                                            • Serialised

                                            In The Box

                                            1x dotMod Tiffany Blue Petri Lite
                                            1x dotMod Limited Edition 24K Gold Plated Brass Drip Tip
                                            1x Original Petri Spring (light throw)
                                            1x Super Heavy Silver Plated Beryllium Copper Spring
                                            1x Certificate Of Authenticity
                                            1x Mini Allen Key For Button Assembly

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 1 review Write a review
                                            Sold Out

                                            SMOK Q-BOX 50W Micro Mod Kit / Baby Beast // 1600mAh

                                            $78.00

                                            Or 4x interest free payments of $19.50 NZD

                                            Brand SMOK

                                            This product is unavailable

                                            The SMOK Q-BOX Micro Mod Kit has landed in NZ! One of the most compact, tiny devices to date, with a large OLED screen and the Baby Beast tank, this setup hits every mark.

                                            Purchase additional coils here: TFV8 Baby & Big Baby Beast Replacement Coil Pack

                                            • Compact size and outstanding performance
                                            • 0.96” OLED Screen
                                            • In built 1600mAh battery
                                            • Wattage output: 1.0 - 50.0W
                                            • Variable temperature control: nickel/titanium/stainless steel 316
                                            • Detailed operating interface
                                            • Micro USB charging port

                                            Q-BOX 50w Micro Mod Specifications
                                            Material: Stainless Steel
                                            Battery Capacity: 1600mAh
                                            Weight: 350g

                                            SMOK TFV8 Baby Beast Specifications
                                            Diameter: 22mm
                                            510 Threaded
                                            2.0ml Capacity
                                            Top Fill Design
                                            SMOK Baby Beast V8 Core Atomiser Heads for Variable Wattage
                                            Larger Heating Air Tube for Higher Airflow Efficiency
                                            Large Dual Adjustable Airflow Slots
                                            Improved e-Liquid Refill Slot for Easy Refills
                                            Wide Bore Delrin Drip Tip
                                            Large Central Airflow Chamber
                                            Stainless Steel Construction
                                            510 Drip Tip Compatible
                                            Includes (2) V8 Baby-M2 Core 0.25ohm Dual Core Atomizer Head
                                            Optional V8 Baby RBA Head (Sold Separately)

                                            In the box
                                            1x QBOX Mod
                                            1x TFV8 Baby Tank
                                            1x V8-Baby M2 0.25Ω (Pre-Installed)
                                            1x V8-Baby M2 0.25Ω Dual Core
                                            1x Micro USB Cable
                                            User Manual
                                            Spare Parts

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 4 reviews Write a review
                                            Sold Out

                                            Eleaf iStick Pico Resin

                                            $56.90

                                            Or 4x interest free payments of $14.23 NZD

                                            Brand Eleaf

                                            This product is unavailable

                                            The iStick Pico Resin is now available in New Zealand! The surface finish of the resin feels soft, almost rubber like, the colours and patterns shine and glimmer at different angles as light penetrates hitting the varying dyed layers of the resin.

                                            The ever popular Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell that can easily be accessed through the battery screw top, providing up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes. Reinforced with brushed stainless steel trimming at the top and bottom of the unit, the Pico looks modern and functional all in a little powerful package.

                                            Please note that due to the random nature of the dying process the colours vary, all look amazing with deep three dimensional effects!

                                            Requires 1x 18650 battery. We recommend the: Samsung 25R, Samsung 30QSony VTC5

                                            • Extremely compact and light weight
                                            • OLED screen
                                            • On board charging (Micro USB)
                                            • Firmware upgradeable
                                            • Three customisable TCR settings for advanced users

                                            Pico Specifications
                                            Size: 45mm x 23mm x 70.5mm
                                            Cell type: high discharge 18650 cell
                                            Cell type: Maximum continuous discharge current should be above 25A
                                            Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
                                            Output wattage: 1-75W
                                            Resistance range: 0.05-1.5ohm (TC modes)
                                            Resistance range: 0.1-3.5ohm (VW/Bypass mode)
                                            Temperature range: 100-315℃/200-600℉ (TC modes) 

                                            In the box

                                            1x Eleaf iStick Pico Resin Mod
                                            1x Micro USB charging cable
                                            User manual

                                            Operation Guide

                                            Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

                                            Vaping: Long press the fire button and take a puff.

                                            Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

                                            Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

                                            Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

                                            Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 2 reviews Write a review
                                            Sold Out

                                            SMOK Stick V8 Kit // Big Baby Beast - 17 Colours

                                            $58.00

                                            Or 4x interest free payments of $14.50 NZD

                                            Brand SMOK

                                            This product is unavailable

                                            Taking the classic design to a new level, the SMOK Stick V8 Kit hits NZ featuring a simple take on sub-ohm kits with an added punch. The 3000mAh internal battery is easily charged through the micro USB port and the LED light indicator located around the power button displays information on battery life. The Stick V8 Kit performs with simple elegance that is unmatched.

                                            The TFV8 Big Baby tank included with each kit is a vapour volume orientated tank system and has a compact stature with the refined functionalities from the TFV8 series. It features adjustable bottom airflow, SMOK's signature hinged top-fill system and utilises the new 0.15Ω and 0.25Ω Baby-M2 Coil heads that are specifically made for the direct voltage based systems. Brilliantly constructed with ergonomic operations and performance capabilities, the SMOK Stick V8 Kit is a phenomenal device at an equally phenomenal price.

                                            Purchase additional coils here - TFV8 Baby & Big Baby Beast Replacement Coil Pack

                                            SMOK Stick V8

                                            • 24.5mm Diameter
                                            • 75mm Height
                                            • Integrated 3000mAh Battery 
                                            • Direct Voltage Output System 
                                            • Operating Voltage Range: 3.4V - 4.2V 
                                            • Single Button Operation 
                                            • Intelligent Battery Life Indicator 
                                            • 8 Second Cutoff Protection 
                                            • Low Resistance Protection 
                                            • Short circuit protection 
                                            • Low Voltage Protection 
                                            • Micro USB Charging Port - Passthrough Capability
                                            • 510 Connection

                                            SMOK TFV8 Big Baby Beast Tank 

                                            • Enlarged Edition Of The Baby Beast
                                            • 24.5mm Diameter
                                            • 5mL Eliquid Capacity
                                            • Stainless Steel Construction
                                            • High-Grade Glass Reinforcement
                                            • Convenient Top-Fill Design With Hinge Lock
                                            • Dual Adjustable Airflow Control At Base
                                            • Black Delrin Ultra-Wide Drip Tip
                                            • 0.15Ω V8 Baby-M2 Dual Coil
                                            • 0.25Ω V8 Baby-M2 Dual Coil
                                            • 510 Connection
                                            In The Box
                                            1x Stick V8 Mod
                                            1x TFV8 Big Baby Beast Tank
                                            1x 0.15Ω V8 Baby-M2 Dual Core
                                            1x 0.25Ω V8 Baby-M2 Dual Core
                                            1x Micro USB Cable
                                            Spare Parts And O-Rings

                                            Instructional Manual

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 50 reviews Write a review
                                            Sold Out

                                            eLeaf iCare

                                            $16.80

                                            Or 4x interest free payments of 25% on orders over $50

                                            Brand Eleaf

                                            This product is unavailable

                                            The Eleaf iCare all in one vape kit is a real game changer at an exceptionally low price point, one of the lowest cost complete vape devices in New Zealand.

                                            It's a tiny and compact e-cigarette starter kit with an internal tank and one of the few to have an adjustable airflow system. Intuitive and simple to use, with an automatic On/Off feature that initiates when vaping and the tank can be refilled from the top with ease. By using a higher strength e-liquid, the iCare perfectly recreates the sensation you are accustomed to and with intuitive three colour LEDs, you can easily check the battery status by a simple glance at the colour of the light. A great pocket friendly device for experienced vapers and anyone looking to quit smoking in NZ alike.

                                            Additional replacement coils

                                            Link: Eleaf iCare IC Replacement Coil Pack

                                            • All In One system
                                            • Draw activated firing
                                            • Integrated 650mAh rechargeable battery
                                            • Micro USB charged
                                            • 1.8ml tank capacity
                                            • Top filled
                                            • iCare IC 1.1 ohm coil
                                            • 5w to 15w output
                                            • Adjustable airflow
                                            • Incredibly compact profile at 30mm x 14mm x 75mm
                                            • Multi use top cap that acts as drip tip
                                            • Integrated coil slot tool
                                            • Three color LED feedback
                                              • Green - 100 to 16% battery state
                                              • Yellow - 15 to 6% battery state
                                              • Red - less Than 5% battery state

                                            In the box
                                            1x Eleaf iCare
                                            2x 1.1ohm IC coils
                                            1x Micro USB charging cable
                                            1x User manual

                                            More Details →

                                            CUSTOMER REVIEWS

                                            Based on 8 reviews Write a review
                                            Sold Out

                                            iJOY RDTA Box 200W Kit // 12.8ml

                                            $88.00

                                            Or 4x interest free payments of $22.00 NZD

                                            Brand iJoy

                                            This product is unavailable

                                            The iJOY RDTA Box 200W Kit combines a huge 12.8ml eliquid capacity tank and the iJOY IMC interchangeable building deck system with the IJOY COMBO RDTA and IJOY Limitless RDTA classic edition, providing expandability and versatility. Likely the first of a new wave of high liquid capacity devices and it's now available in New Zealand.

                                            • IMC Interchangeable building deck
                                            • More than 10 decks to choose from
                                            • 0.96-inch OLED Screen
                                            • Unique custom user mode
                                            • Tank capacity: 12.8ml
                                            • 15mm wide filling hole
                                            • Delrin and stainless steel chuff cap
                                            • NI/TI/SS temperature control
                                            Specifications
                                            Output wattage: 5-200 watts
                                            Output voltage: 1-8 volts
                                            Output current: 1-45 amps
                                            Resistance range: 0.05-3.0 ohm
                                            Energy conversion rate: 95%
                                            Battery type: dual 18650 (not included)
                                            Firmware upgradeable
                                            Dimensions: 105mm x 55mm x 28mm
                                              In the box

                                              1 x RDTA Box Mod
                                              1x IMC-3 Interchangeable gold plated deck
                                              1x IMC-Coil 3 pre-made coil
                                              1x Screwdriver
                                              1x Manual
                                              1x USB cable
                                              1x Tool pack

                                              More Details →

                                              CUSTOMER REVIEWS

                                              Based on 2 reviews Write a review
                                              Sold Out

                                              Eleaf iStick Pico

                                              $53.95

                                              Or 4x interest free payments of $13.49 NZD

                                              Brand Eleaf

                                              This product is unavailable

                                              The iStick Pico is an innovative and compact mod that you can hold in the palm of your hand. Powered by a single interchangeable 18650 cell, the iStick Pico provides up to a maximum of 75 watts output and features switchable VW/Bypass/TC-Ni/TC-Ti/TCR modes.

                                              Requires 1x 18650 battery. We recommend the: Samsung 25R5, Sony VTC5

                                              • Extremely compact and light weight
                                              • Powered by a single high drain 18650 battery (not included)
                                              • Micro USB charging (included)
                                              • Firmware upgradeable
                                              • Three customisable TCR settings for advanced users
                                              Specifications
                                              Size: 45mm x 23mm x 70.5mm
                                              Cell type: high discharge 18650 cell
                                              Cell type: Maximum continuous discharge current should be above 25A
                                              Output modes: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
                                              Output wattage: 1-75W
                                              Resistance range: 0.05-1.5ohm (TC modes)
                                              Resistance range: 0.1-3.5ohm (VW/Bypass mode)
                                              Temperature range: 100-315℃/200-600℉ (TC modes)
                                               
                                              In the box

                                              1x Eleaf iStick Pico Mod 
                                              1x USB cable
                                              Instruction manual  

                                              Operation Guide

                                              Power on and off: Install a high-rate 18650 battery (discharge current above 25A); press fire button 5 times continuously to turn on/off the device.

                                              Vaping: Long press the fire button and take a puff.

                                              Stealth function: While the device is on, simultaneously hold the fire button and the down button. This will allow you to switch between the Stealth on and off function.

                                              Lock/unlock: While the device is on, simultaneously keep pressing up and down buttons for 2 seconds. This will allow to switch between lock and unlock.

                                              Switch the display Mode: While the device is powered off, keep pressing up and down buttons simultaneously for 2 seconds, the display will rotate 180 degrees.

                                              Shift between VW/Bypass/TC-Ni/TC-Ti/TC-SS/TCR mode: While the device is on, press the fire button 3 times in quick succession, the first row will flash to indicate you entering the menu. Press the up or down button to switch between different modes. Then press the fire button one time to confirm the mode you chose.

                                              More Details →

                                              CUSTOMER REVIEWS

                                              Based on 7 reviews Write a review
                                              Sold Out

                                              Kanger SUBOX Mini Kit - Black/White

                                              $119.95

                                              Or 4x interest free payments of $29.99 NZD

                                              Brand Kangertech

                                              This product is unavailable

                                              The Kanger SUBOX Mini Kit is the #1 kit for new and veteran vapers alike. Extremely compact, superior performance and outstanding value - Kanger is pushing affordable vape technology forward in leaps and bounds.

                                              Includes:

                                              • Kanger KBOX Mini 50w Mod
                                              • Kanger Subtank Mini
                                              • 0.5ohm and 1.5ohm Vertical OCC Heads
                                              • Subtank Mini RBA PLUS section

                                              Requires 1x 18650 battery (not included). We recommend the Sony VTC5 18650 2600mAh 30A Continuous Discharge Battery that can be found here: Sony VTC5

                                               

                                               

                                              More Details →

                                              Customer Reviews

                                              Based on 3 reviews Write a review
                                              Sold Out

                                              Vapor Shark rDNA DNA40

                                              $248.00

                                              Or 4x interest free payments of $62.00 NZD

                                              Brand Vapor Shark

                                              This product is unavailable

                                              The rDNA DNA40 is the latest generation compact portable mod by Vapor Shark running Evolv's latest v5 gold chip with large screen. In addition to the outstanding attributes of previous versions, this version introduces some new and radically different features, never before seen in an electronic cigarette. This rDNA is the most powerful, yet also the most efficient version ever released; providing up to 40 watts of power while actively conserving battery life. Incredibly, this device is able to seamlessly transition between using coils wrapped with traditional resistance wire (Kanthal, Nichrome) as well as Nickel wire. The use of Nickel wire allows this device to monitor and limit the temperature of the coil, meaning an end to charred wicks (when properly configured) and opening a new realm of possibilities for coil building. The term most frequently used to describe this new technology is "game-changing"; and to say that this device will do anything less than completely revolutionise the way we vape, would be to understate the fact.


                                              New features include:

                                              • Zip high speed charging
                                              • Larger screen
                                              • Reverse polarity buzzer
                                              • Powered by Evolv DNA40
                                              • 40 Watts of Power
                                              • LG 2500 mAh 35A 18650 battery
                                              • Gold plated, spring-loaded center pin
                                              • Integrated Wireless Charging, with available Micro-USB port
                                              • Matte black
                                              • Temperature sensing / limiting technology
                                              • 3.25" x 1.67" x 0.95"
                                              • Magnetic battery door and ejection ribbon
                                              • Reverse polarity protection
                                              • Supports 0.16 Ohms and higher
                                              • Four month manufacturer warranty
                                              More Details →
                                              Sold Out

                                              Hana Modz Mini V3 DNA30

                                              $229.00

                                              Or 4x interest free payments of $57.25 NZD

                                              Brand Hana Modz

                                              This product is unavailable


                                              The HANA MODZ V3 is a BILLET 6061 Aluminium DNA30 controlled battery pack with a 510 connector. Variable watt battery pack that lets you control wattage not voltage, for better consistency and repeatability. Built using high quality components. Power regulated digital switch-mode DC-DC converter. It features a small OLED display, buttons and synchronous rectification for maximum battery life and minimal heat generation

                                              The separate UP and DOWN button allows the user to increase or decrease the power level in .1 watt increments.

                                              Built in DNA Charger; which is MICRO USB powered and provides a 500 milliamp charge current.

                                              ATTENTION PACK V3: Battery must be installed in the proper position. + Positive side of battery towards the top of the device. - Negative side towards the bottom. Damage can occur if the battery is installed improperly. Warranty will be void if battery is installed incorrectly.

                                              Warning: You must have a battery installed to be used as a pass-thru. Damage may occur if a battery is not properly installed. Charge port must be free of any liquid or debris before plugging in the micro USB charge cord. Serious damage can occur if charge area is not free of debris.​


                                              PACK V3 - BATTERY NOT INCLUDED: Recommended batteries:

                                              7-20 watts - AW IMR, Panasonic CGR
                                              20+ watts - Sony VTC4/5


                                              MINI PACK V3
                                              Inbuilt 1200mah lithium polymer battery pack. The Mini Pack may be used as a pass-thru while charging.

                                              Operating Discharge Temperature: -10 - 60 Degree Celsius

                                              USERS GUIDE:
                                              Normal operation watt setting: The power level currently set on the DNA 30D. Battery indicator: The current state of charge of the battery.

                                              Volts display: The output voltage being supplied to the atomizer.

                                              Ohms display: The resistance of the atomizer attached to the device. This is measured only when the unit is supplying power to the atomizer. At other times, it shows the most recent measurement.

                                              Other modes:
                                              Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen wil