Wismec Reauleaux RX2/3 Silicone Case
Silicone cases for the Wismec Reauleaux RX2/3.
- Soft-touch finish for comfortable handling
- Provides protection without unnecessary bulk
- Easily access to buttons
You might also like
Reuleaux RX2/3, an updated version of Reuleaux series, designed by JayBo, features a replaceable back cover for two or three cells with power output of 150w or 200w respectively. Powerful yet intelligent with variable temperature control function and upgradeable firmware, custom logos and additional protective cases, the Reauleaux RX2/3 is outstanding mod in all areas.
Silicon cases: Wismec Reauleaux RX2/3 Silicon Case
Firmware v4.13 update
Maximum output power upgraded to 250W, custom logo and preheat function available.
Size: 40.2*34.5*88.7mm (for 2 cells)
Size: 40.2*50.1*88.7mm (for 3 cells)
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell
Cell type: (discharging current should be above 25A)
Output mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output wattage: 1-150W (for 2 cells)/1-200W (for 3 cells)
Resistance range: 0.05-1.5ohm for TC modes
Resistance range:0.1-3.5ohm for VW mode
Temperature range: 100-315°C/ 200-600°F (TC modes)
1x Reuleaux RX2/3
1x Back cover
1x USB cable
1x User manual
This product is unavailable
The Theorem atomiser designed by JayBo and inspired by SMM is Wismec’s first drip tank hybrid featuring the new and exciting 316L stainless steel NotchCoil. This atomiser is the first to utilise an open wicking system, a combined top airflow juice plug and a solid leakproof sleeve design. Removing the glass sleeve from the deck exposes the build area making it completely accessible and easy to install both cotton and coils. Removing the top airflow cap simultaneously exposes the fill port, allowing the user to easily refill the atomiser without altering their airflow settings.
Click to view: NotchCoil with cotton (5 pack) by Wismec & JayBo
Click to view: Alien Clapton Coils & Staple Staggered Fused Clapton Coils
- Brand new NotchCoil with cotton
- Top fill
- Additional atomiser tube & dual airflow control ring
- 22mm diameter
- Dual mode structure
- Jay Bo signature triple airhole intake
- Adjustable top airflow intake
- Threadless design
- O-ring sealed
- Unique two post arrangement
- Allows for vertical or offset coil arrangements
- Deck milled negative posts
- 'T' post positive
- Side tensioned applied grub screws
- PEEK Insulator
Specifications: Diameter: 22mm. Length: 46.25mm.
Main Features: Stainless steel material & detachable structure - the Theorem atomiser is made of stainless steel with all components being convenient to detach and clean.
Optional atomiser tube - in addition to the transparent glass tube which presents all inner components and e-liquid level clearly, the optional steel tube will bring a different visual look.
Innovative top filling - removing the integrated top airflow cap and juice plug simultaneously exposes the fill port, allowing easy refilling of the tank without altering the airflow settings.
Convenient airflow control - airflow is adjusted by turning the control ring clockwise or anticlockwise.
Brand-new NotchCoil with cotton - additionally to the equipped NotchCoil with cotton the Theorem can be rebuilt with user-made coils.
In the box:
1x Theorem atomiser
2x Airflow control rings (single and dual)
1x Stainless lined glass sleeve
1x Glass sleeve
2x NotchCoil with cotton
3x Silicon o-rings (cyan)
1x Hex key 1.25mm Drive (0.05in)
1x User manual
Noisy Cricket II-25 is the updated multifunction version of Noisy Cricket Mod. It features the optional circuit in series and parallel, multiple circuit protection systems are applied which make the device much safe and reliable. Moreover, two modes are available under circuit in series: direct output and constant voltage output.
- Optional circuit in series and parallel
- Alternative operating mode
- Multiple circuit protection systems
- Unique design of adjustable voltage
- Battery display function
The button light will stay lit or flash slowly when the battery quantity is high. On the contrary, the light will flash frequently.
60% - 100% Stay lit
30% - 59% Flash slowly
10% - 29% Flash moderately
0 - 9% Flash frequently
Charging: Please take out the cells and charge through external charger.
Alternative Operating Mode: Under Cells in Series Circuit Condition, two modes are available: Direct Output mode and Constant Voltage Output mode. When powered off, long press the fire button for about 5 seconds to shift between direct output mode (white light) and constant voltage output mode (orange light). Release the button to choose the current mode.
Voltage adjustment: By rotating the voltage regulating switch under series circuit condition, the output voltage can be adjusted from 2V to 6V.
Size (length x width x height): 48 x 25 x 87mm
Cell type: two high-rate 18650 cells, discharging current should be above 25A (NOT included)
Thread type: 510 spring loaded thread
In the box
1 x WISMEC Noisy Cricket II-25 MOD
1 x Warning card
1 x User manual
This product is unavailable
- 316L stainless steel
- Fast ramp up time
- 5.5mm internal diameter
- Preinstalled cotton